786924-1 Tyco Electronics, 786924-1 Datasheet - Page 2

• Manufacturer Part Number: 786924-1
• Description: Circular DIN Connectors MINI DIN 8 R/A
• Manufacturer: Tyco Electronics

Specifications of 786924-1

• Standard: Mini DIN
• Product Type: Connectors
• Number Of Contacts: 8
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.4.
3.5.
Rev F
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Transfer impedance.
Solderability.
Vibration, random.
Physical shock.
Performance and Test Description
Product is designed to meet electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing.
20 milliohms maximum initial.
30 milliohms maximum final.
1000 megohms minimum.
500 vac at sea level.
30 MHz, -18 dB ohm or better.
160 MHz, -5 dB ohm or better.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
TE 109-6-1.
Subject mated contacts assembled
in housing to 50 mv maximum
open circuit at 100 ma maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent contacts of
unmated samples.
TE Spec 109-29-1.
Test between adjacent contacts of
unmated samples.
TE Spec 109-175.
Measure transfer impedance of
mated samples with front panel
grounding finger.
TE Spec 109-11-1.
Subject samples to solderability.
TE Spec 109-21-5.
Subject mated samples to 16.91
G's rms. 20 minutes in each of 3
mutually perpendicular planes.
See Figure 4.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
Procedure
108-1225
2 of 6