AD5311BRT-500RL7 Analog Devices Inc, AD5311BRT-500RL7 Datasheet - Page 19

• Manufacturer Part Number: AD5311BRT-500RL7
• Description: IC DAC 10BIT 2WIRE W/BUFF SOT-23
• Manufacturer: Analog Devices Inc

Specifications of AD5311BRT-500RL7

• Rohs Status: RoHS non-compliant
• Settling Time: 7µs
• Number Of Bits: 10
• Data Interface: I²C, Serial
• Number Of Converters: 1
• Voltage Supply Source: Single Supply
• Power Dissipation (max): 1.4mW
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-6

POWER SUPPLY DECOUPLING
In any circuit where accuracy is important, careful considera-
tion of the power supply and ground return layout helps to
ensure the rated performance. The AD5301/AD5311/AD5321
should be decoupled to GND with 10 μF in parallel with a
0.1 μF capacitor, located as close to the package as possible.
The 10 μF capacitor should be the tantalum bead type, while
MASTER
A1
A0
SDA
AD5301
V
OUT
SCL
R
P
Figure 38. Multiple AD5301 Devices on One Bus
V
DD
R
P
5V
A1
A0
SDA
AD5301
Rev. B | Page 19 of 24
V
OUT
SCL
V
DD
a ceramic 0.1 μF capacitor provides a sufficient low impedance
path to ground at high frequencies. The power supply lines of
the AD5301/AD5311/AD5321 should use as large a trace as
possible to provide low impedance paths. A ground line routed
between the SDA and SCL lines helps reduce crosstalk between
them. This is not required on a multilayer board as there is a
ground plane layer, but separating the lines helps.
A1
A0
SDA
AD5301
V
OUT
SCL
V
DD
AD5301/AD5311/AD5321
SDA
A1
A0
AD5301
V
OUT
SCL
SDA
SCL