12-22SURSYGC/S530-A3/E2/TR8 Everlight Electronics CO., LTD, 12-22SURSYGC/S530-A3/E2/TR8 Datasheet - Page 10

• Manufacturer Part Number: 12-22SURSYGC/S530-A3/E2/TR8
• Description: LED A1GAINP RED/GRN CLR RA 1206
• Manufacturer: Everlight Electronics CO., LTD

Specifications of 12-22SURSYGC/S530-A3/E2/TR8

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

1. Over-current-proof
2. Storage
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
Precautions For Use
Everlight Electronics Co., Ltd.
Device No:SZDSE-122-016
If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
EVERLIGHT ELECTRONICS CO.,LTD.
http://www.everlight.com
Prepared date: 31-Octr-2008
12-22SURSYGC/S530-A3/E2/TR8
Rev 1
Prepared by: Qilong Chen
Page: 10 of 11