AM2LP-0505S-NZ Aimtec Inc., AM2LP-0505S-NZ Datasheet - Page 3

no-image

AM2LP-0505S-NZ

Manufacturer Part Number
AM2LP-0505S-NZ
Description
DC/DC 2 WATT
Manufacturer
Aimtec Inc.
Datasheets
External Capacitor Tables
Input Capacitor (Cin)
NOTE: 1.
by Aimtec; refer to www.aimtec.com for the most current product specifications.
date manufactured.
nominal input voltage and at rated output load unless otherwise
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release.
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet.
www.aimtec.com
F 051e R12.A
(VDC)
Vin
12
24
5
If it is required to decrease the input/output ripple, an “LC” filter network can be installed on the input and output of the
converter (see above).
It should be noted that the inductance and the resonant frequency of the “LC” filtering network should differ from the
DC/DC converter switching frequency to avoid mutual interference.
The capacitance of the output filter capacitor must not exceed the values in the Table below to avoid startup problems
and ensure safe and reliable operation.
It’s not recommended to connect any external capacitor in the application field when output loading is less than 0.5 watt.
Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
(uF)
0.47
Cin
3.
4.7
2.2
Mechanical drawings and specifications are for reference only.
specified.
Output Capacitor (Cout)
Single Vout
5.
(VDC)
Tel: +1 514 620 2722
Aimtec may not have conducted destructive testing or chemical analysis on all internal components
12
15
24
7.
5
2.
Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
Product labels shown, including safety agency certifications on labels, may vary based on the
3 of 3
4.
All specifications are measured at an ambient temperature of 25°C, humidity<75%,
Cout
(uF)
0.47
1
2.2
10
Series AM2LP-NZ
2 Watt | DC-DC Converter
Toll free: + 1 888 9 AIMTEC
North America only
6.
(924 6832)
This

Related parts for AM2LP-0505S-NZ