LQ150X1LGN2E Sharp Electronics, LQ150X1LGN2E Datasheet - Page 21

• Manufacturer Part Number: LQ150X1LGN2E
• Manufacturer: Sharp Electronics

Specifications of LQ150X1LGN2E

• Lead Free Status / Rohs Status: Compliant

11. Packing form
u) When install LCD modules in the cabinet, recommended torque value is “0.294±0.02N･m
v) Be sure to confirm it in the same condition as it is installed in your instrument.
w) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible if it gets
x) Notice:Never dismantle the module , because it will cause failure.
y) Be careful when using it for long time with fixed pattern display as it may cause afterimage.
z) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.
aa) If a minute particle enters in the module and adheres to an optical material, it may cause display non-
If adjusted value is changed, the specification may not be satisfied.
a) Production country : JAPAN , TAIWAN, CHINA
b) Piling number of cartons : maximum 6 cartons
c) Packing quantity in one carton : 10 modules
d) Carton size : 408mm(W)×340mm(H)×398mm(D)
e) total mass of one carton filled with full modules : 12.0kg(typ.)
f) Packing form is shown in Fig.3
inside your eye or mouth by mistake.
uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation hole if you
intend to install a fan.
(3.0±0.2kgf･cm)”.
LD-18317A-18