NL10276BC30-04D NEC Electronics, NL10276BC30-04D Datasheet - Page 21

• Manufacturer Part Number: NL10276BC30-04D
• Manufacturer: NEC Electronics

Specifications of NL10276BC30-04D

• Lead Free Status / Rohs Status: Not Compliant

(4) Cautions about module characteristics
(5) Cautions for assembling of an inverter
(6) Other cautions
a) Do not apply a fixed-patterns data for a long time to the LCD module. It may cause image sticking. Please
b) This module has retardation film, which may cause variation in the color hue at different viewing angles. A
c) A light vertical stripe may be observed, depending on the display pattern. This is neither a defect nor a
d) Noise from the inverter circuit may observed in the luminance control mode. This is neither a defect nor a
a) Please insert an insulation sheet between the inverter and the mold chassis when the inverter is assembled
a) Do not disassemble and/or reassemble the LCD module.
b) Do not readjust variable resistors or switches in the module.
c) When returning the module for repair, etc., please pack the module properly to avoid damage.
d) In case that the scan converter is used to convert VGA signal to NTSC, it is recommended using the frame-
The liquid crystal display has the following specific characteristics. These are neither a defect nor a
malfunction.
The optical characteristics of this module may be affected by the ambient temperature.
This module has a cold cathode tube for backlight. Optical characteristics, like luminance or uniformity,
will change over time.
Uneven brightness and/or small spots may be observed, depending on different display patterns.
use screen savers if the display pattern is fixed for a long time.
non-uniformity may appear on the screen during high-temperature operation.
malfunction.
malfunction.
to the mold chassis. If you do not insert the insulation sheet, electric discharge may occur from the inverter
to the module.
Before an insulation sheet is adopted, the material and the thickness of an insulation sheet should be
considered.
(Design example:
recommend the original shipping packages.
memory type, not the line-memory.
Thickness of the inverter printed wiring board: 1.0 mm
Thickness of the insulation sheet:
Material:
Data Sheet EN0488EJ1V0DS00
0.4 mm
Polyethylene terephtalate (UL class: 94 V-0)
NL10276BC30-04D
We
21