AD5628BRUZ-2 Analog Devices Inc, AD5628BRUZ-2 Datasheet - Page 19

• Manufacturer Part Number: AD5628BRUZ-2
• Description: IC DAC 12BIT OCT 5V REF 16-TSSOP
• Manufacturer: Analog Devices Inc

Specifications of AD5628BRUZ-2

• Data Interface: DSP, MICROWIRE™, QSPI™, Serial, SPI™
• Settling Time: 6µs
• Number Of Bits: 12
• Number Of Converters: 8
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP
• Resolution (bits): 12bit
• Sampling Rate: 95kSPS
• Input Channel Type: Serial
• Supply Voltage Range - Analog: 2.7V To 3.6V, 4.5V To 5.5V
• Supply Current: 2mA
• Number Of Channels: 8
• Resolution: 12b
• Conversion Rate: 95KSPS
• Interface Type: SER 3W SPI QSPI UW
• Single Supply Voltage (typ): 3.3/5V
• Dual Supply Voltage (typ): Not RequiredV
• Architecture: Resistor-String
• Power Supply Requirement: Single
• Output Type: Voltage
• Integral Nonlinearity Error: ±1LSB
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Operating Temp Range: -40C to 105C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 16
• Package Type: TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power Dissipation (max): -
• Lead Free Status / Rohs Status: Compliant

DAC-to-DAC Crosstalk
DAC-to-DAC crosstalk is the glitch impulse transferred to the
output of one DAC due to a digital code change and subsequent
output change of another DAC. This includes both digital and
analog crosstalk. It is measured by loading one of the DACs
with a full-scale code change (all 0s to all 1s or vice versa) with
LDAC low and monitoring the output of another DAC. The
energy of the glitch is expressed in nV-s.
Multiplying Bandwidth
The amplifiers within the DAC have a finite bandwidth. The
multiplying bandwidth is a measure of this. A sine wave on the
reference (with full-scale code loaded to the DAC) appears on
the output. The multiplying bandwidth is the frequency at
which the output amplitude falls to 3 dB below the input.
Rev. E | Page 19 of 28
Total Harmonic Distortion (THD)
Total harmonic distortion is the difference between an ideal
sine wave and its attenuated version using the DAC. The sine
wave is used as the reference for the DAC, and the THD is a
measure of the harmonics present on the DAC output. It is
measured in decibels.
AD5628/AD5648/AD5668