66109-2 TE Connectivity, 66109-2 Datasheet - Page 3

• Manufacturer Part Number: 66109-2
• Description: Connector Contact,SKT,CRIMP Terminal
• Manufacturer: TE Connectivity
• Series: Type III+r

Specifications of 66109-2

• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Bright Tin-Lead
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.12-0.24² [26-24]
• Spring Material: Stainless Steel
• Used With: G Series Connectors, M Series Connectors, CPC Connectors
• Contact Type: Socket
• Contact Classification: Signal
• Contact Plating, Mating Area, Material: Bright Tin-Lead
• Contact Base Material: Brass
• Contact Size: 16
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.89 – 1.40 [0.035 – 0.055]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Loose Piece
• Packaging Quantity: 1,000 Box/Carton

Crim p tensile.
Durability.
Therm al shock.
Hum idity/tem perature cycling.
Mixed flowing gas.
Tem perature life.
Rev E
Test Description
Show no evidence of dam age;
contact engaging and separating
force.
Shall show no evidence of dam age;
m eet term ination resistance, dry
circuit; term ination resistance,
specified current; and engaging and
separating force.
Term ination resistance, dry circuit;
engaging and separating force.
Show no evidence of dam age; m eet
term ination resistance, dry circuit;
and term ination resistance,
specified current.
Shall show no evidence of dam age;
m eet term ination resistance, dry
circuit; term ination resistance,
specified current; and engaging and
separating force.
W ire Size
(AW G)
14
16
18
20
22
24
26
28
30
ENVIRONMENTAL
Requirem ents
Figure 1 (end)
(lbs m inim um )
Crim p Tensile
40
40
25
17
10
2.5
1.5
7
4
TE Spec 109-16.
Determ ine crim p tensile at a rate of
1 inch per m inute.
TE Spec 109-27, except cycle rate
shall not exceed 300 cycles per
hour.
Contacts shall be installed in a
suitable fixture and subjected to 500
cycles for precious m etal plated
contacts and 50 cycles for tin plated
contacts. The applicable
counterpart connector inserts m ay
be used for the fixture.
TE Spec 109-22.
Subject m ated contacts to 10 cycles
between -55 and 90°C for tin plated
contacts and -55 and 150°C for
precious m etal plated contacts.
TE Spec 109-23, Method III,
Condition B.
Subject m ated connectors to 10
hum idity/tem perature cycles
between 25 and 65°C at 95% RH
with cold shock at -10°C less Step
7b..
TE Spec 109-85-2.
Subject m ated contacts to
environm ental class II for 10 days.
TE Spec 109-43.
Subject m ated connectors to
tem perature life for 240 hours at
150°C for precious m etal plated
contacts and 90°C for tin plated
contacts.
Procedure
108-10042
3 of 7