5223002-4 TE Connectivity, 5223002-4 Datasheet - Page 2

• Manufacturer Part Number: 5223002-4
• Description: HARD METRIC CONNECTOR, HEADER, 120POS
• Manufacturer: TE Connectivity
• Series: Z-PACKr

Specifications of 5223002-4

• Connector Type: Backplane
• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 120
• Gender: Header
• Contact Termination: Press Fit
• No. Of Rows: 5
• Contact Plating: Gold
• Rohs Compliant: Yes
• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Post Type: Press-Fit
• Module Type: Signal
• Mating Post Length (mm [in]): 6.50 [0.256]
• Press-fit Post Style: Compliant Pin
• Pin Header Width (mm [in]): 18.00 [0.709]
• Voltage Rating (vac): 30
• Termination Post Length (mm [in]): 4.25 [0.167]
• Number Of Signal Positions: 120
• Sequencing: No
• Number Of Rows: 5
• Post Plating: Tin
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Housing Material: Liquid Crystal Polymer (LCP)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Fixed-Board
• Lead Free Status / Rohs Status: Details

3.3.
3.4.
3.5.
Rev C
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Ratings
!
!
!
!
Performance and Test Description
Product is designed to meet electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 30 volts alternating current
Current:
•
•
Temperature: -55 to 125° C
Maximum Initial Contact Resistance: See Figure 1
Power: 3 amperes per contact
Signal: See Figure 5 for applicable current carrying capability
Row
A
B
C
D
Meets requirements of product
drawing.
See Figure 1
∆R 10 milliohms maximum.
5000 megohms minimum initial.
100 megohms minimum final.
1000 vac.
30° C maximum temperatur e rise at
specified current. Signal contacts
only.
Maximum Initial Contact Resistance (m )
Signal
Figure 2 (continued)
25
35
40
45
ELECTRICAL
Requirement
Figure 1
Power
10
10
10
10
Visual, dimensional and functional
per applicable quality inspection
plan.
TE 109-6-6.
Subject mated contacts assembled
in housing to 20 mv maximum
open circuit at 100 ma maximum.
See Figure 4.
TE Spec 109-28-4.
Test between adjacent contacts of
mated samples.
TE Spec 109-29-1.
Test between adjacent contacts of
mated samples. Test a minimum of
5 contacts per sample.
TE Spec 109-45-1.
Measure temperature rise vs
current.
See Figure 5.
Procedure
108-1441
2 of 8