1934222-1 TE Connectivity, 1934222-1 Datasheet - Page 3

• Manufacturer Part Number: 1934222-1
• Description: BACKPLANE CONNECTOR, RECEPTACLE, 32POS
• Manufacturer: TE Connectivity
• Series: Z-PACK TinManr

Specifications of 1934222-1

• Connector Type: Backplane
• Row Pitch: 1.9mm
• Pitch Spacing: 1.4mm
• No. Of Contacts: 32
• Gender: Receptacle
• Contact Termination: Right Angle Through Hole
• No. Of Rows: 12
• Rohs Compliant: Yes
• Number Of Positions / Contacts: 24
• Pitch: 3.96 mm
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: With
• Termination Method To Pc Board: Through Hole - Press Fit
• Pcb Mount Alignment: Without
• Sealed: No
• Ul File Number: E28476
• Stackable: No
• Data Rate (gb/s): 10.000
• Differential Impedance (?): 100
• Contact - Rated Current (a): 0.5
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Tail Length (mm [in]): 2.2 [0.087]
• Number Of Positions: 96
• Number Of Signal Positions: 64
• Number Of Rows: 12
• Number Of Columns: 8
• Pcb Mount Retention Type: Compliant Posts
• Centerline (mm [in]): 1.91 [0.075]
• Row-to-row Spacing (mm [in]): 1.40 [0.055]
• Mating Retention: Without
• Contact Type: Socket
• Contact Design: Dual Beam
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Tail Plating Material: Matte Tin
• Tail Plating, Thickness (µm [?in]): 0.5 [20]
• Connector Style: Receptacle
• Housing Color: Black
• Mating Alignment: With
• Mating Alignment Type: Guide Slot
• Housing Material: Liquid Crystal Polymer (LCP)
• Ul Flammability Rating: UL 94V-0
• Number Of Pairs Per Connector: 32
• Pairs Per Column: 4
• Differential Signaling: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 250
• Operating Temperature (°c [°f]): -65 – +90 [-85 – +194]
• Board-to-board Configuration: Co-Planar, Co-Planar/Right Angle, Right Angle
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Tube
• Lead Free Status / Rohs Status: Details

Vibration, random .
Mechanical shock.
Durability.
Mating force.
Unm ating force.
Com pliant pin insertion force.
Com pliant pin retention force.
Minute disturbance.
Therm al shock.
Rev B
Test Description
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
0.44 N [.1 lbf] m axim um average
per m ated contact.
0.1 N [.022 lbf] m inim um average
per contact.
44.5 N [10 lbf] m axim um average
per pin.
4.4 N [1 lbf] m inim um average per
pin.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
MECHANICAL
Requirem ent
EIA-364-28, Test Condition VII,
Condition D.
Subject m ated specim ens to 3.10
G's rm s between 20 to 500 Hz.
Fifteen m inutes in each of 3
m utually perpendicular planes.
See Figure 4.
EIA-364-27, Method A.
Subject m ated specim ens to
490m /s (50 G's) half-sine shock
pulses of 11 m illiseconds duration.
Three shocks in each direction
applied along 3 m utually
perpendicular planes, 18 total
shocks.
See Figure 4.
EIA-364-9.
Mate and unm ate specim ens for
200 cycles at a m axim um rate of
600 cycles per hour.
EIA-364-13.
Measure force necessary to m ate
specim ens at a m axim um rate of
12.7 m m [.5 in] per m inute.
EIA-364-13.
Measure force necessary to unm ate
specim ens at a m axim um rate of
12.7 m m [.5 in] per m inute.
EIA-364-5.
Measure force necessary to seat
pins into a printed circuit board with
tin-lead plating at a m axim um rate
of 12.7 m m [.5 in] per m inute.
EIA-364-5.
Measure force necessary to unseat
pins from a printed circuit board
with tin-lead plating at a m axim um
rate of 12.7 m m [.5 in] per m inute.
Unm ate and m ate each connector
pair a distance of approxim ately 0.1
m m [.004 in].
EIA-364-32, Test Condition II.
Subject unm ated specim ens to 5
cycles between -65 and 90°C with
30 m inute dwells at tem perature
extrem es and 1 m inute transition
between tem peratures.
2
Procedure
108-2303
3 of 8