747547-9 TE Connectivity, 747547-9 Datasheet - Page 5
![D SUB CONNECTOR, STANDARD, 25POS, PLUG](/photos/24/46/244603/4461946_sml.jpg)
747547-9
Manufacturer Part Number
747547-9
Description
D SUB CONNECTOR, STANDARD, 25POS, PLUG
Manufacturer
TE Connectivity
Series
AMPLIMITE HDE-20r
Specifications of 747547-9
Connector Type
High Density D Sub
No. Of Contacts
25
D Sub Shell Size
DB
Connector Body Material
Metal
Gender
Plug
Contact Termination
IDC / IDT
Rohs Compliant
Yes
Product Type
Connector
Product Series
HDE-20 (IDC)
Wire/cable Type
Discrete Wire, Round Jacketed Cable
Termination Method To Wire/cable
Insulation Displacement Crimp (IDC)
Wire Insulation Diameter (mm [in])
1.52 [0.060]
Mating Connector Lock
With
Mating Connector Lock Type
Mounting Holes
Shell Size
3
Shell Type
Front Metal Shell
Grounding Indents
With
Insulation Support
Yes
Grade
Standard
Color
Black
Shell Material
Steel
Shield Material
Steel
Shielded
Yes
Solder Tail Contact Plating
Tin over Nickel
Number Of Positions
25
Wire Range (mm² [awg])
0.15 - 0.40 [26-22]
Pre-assembled
No
Cable Insulation Diameter (mm [in])
4.19 – 11.56 [0.165 – 0.455]
Shell Plating
Tin
Shield Plating
Tin
Insert Material
Thermoplastic
Insert Flammability Rating
UL 94V-0
Cable Diameter (max.) (mm [in])
11.56 [0.455]
Preloaded
Yes
Contact Type
Pin
Contact Base Material
Phosphor Bronze
Contact Plating, Mating Area, Material
Gold (30)
Contact Size
20
Enclosure
With
Connector Style
Plug
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Packaging Method
Bulk
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
747547-9
Manufacturer:
TE Connectivity AMP Connectors
Quantity:
457
4.
4.1.
4.2.
4.3.
4.4.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit, or function are made to the product or to the manufacturing
process, product assurance shall coordinate requalification testing, consisting of all or part of the
original testing sequence as determined by development/product, quality, and reliability
engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup, or operator deficiencies shall not disqualify the product. When
product failure occurs, corrective action shall be taken and samples resubmitted for qualification.
Testing to confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan will specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Sample Selection
Connectors housings and contacts shall be prepared in accordance with applicable Instruction
Sheets. They shall be selected at random from current production. Test groups 1, 2, 3 and 4 shall
consist of 37 position, all plastic plugs and receptacles; gold flash duplex plated contacts.
Contacts in these groups shall be terminated as follows: 20 and 22 AWG to the number 3 slot, 24
and 26 AWG to the number 2 slot, and 30 AWG to the number 1 slot. Test group 5 shall consist of
25 position, all plastic plugs and receptacles; gold flash duplex plated contacts. Contacts in group
5 shall be terminated as follows: 22 AWG to the number 3 slot, 22 and 26 AWG to the number 2
slot, 26 and 30 AWG to the number 1 slot. Test group 6 shall consist of 37 position, all plastic
plugs and receptacles; gold flash duplex plated contacts. Contacts in group 6 shall be terminated
as follows: 20 and 22AWG to the number 3 slot. Test group 7 shall consist of 9 position, all plastic
plugs and gold flash duplex plated F crimp replacement contacts. Contacts to be terminated as
follows: 20 and 22 AWG to the number 3 slot, 22, 24 and 26 AWG to the number 2 slot, 26, 28
and 30 AWG to the number 1 slot. F crimp contacts to be terminated to 18, 20 and 22 AWG wire
and 22, 24 and 26 AWG wire as applicable. Test group 8 shall consist of 9, 15, 25 and 37 position
plugs and receptacles; all plastic and metal shall (any plating or slot size) un-terminated.
Test Sequence
Qualification inspection shall be verified by testing samples as specified in Figure 2.
108-40011
5 of 7