66741-8 TE Connectivity, 66741-8 Datasheet - Page 3

• Manufacturer Part Number: 66741-8
• Description: CONTACT, SOCKET, 10AWG, CRIMP
• Manufacturer: TE Connectivity
• Series: Type XIIr

Specifications of 66741-8

• Connector Type: Contact, Crimp
• Current Rating: 35A
• Contact Plating: Tin
• Contact Material: Copper
• Contact Termination: Crimp
• Rohs Compliant: No
• Contact Gender: Socket
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Tin-Lead
• Wire Range (mm [awg]): 5.00-6.00² [10]
• Used With: G Series Connectors, M Series Connectors, CPC Connectors
• Contact Type: Socket
• Contact Classification: Power
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Copper
• Contact Size: Power Contact
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Accepts Wire Insulation Diameter, Range (mm [in]): 4.83 – 5.59 [0.190 – 0.220]
• Applies To: Wire/Cable
• Test Current (a): 15.0
• Packaging Method: Loose Piece
• For Use With: G Series, M Series, CPC Connectors

Test Description
Crimp Tensile
Durability
Humidity-Temperature Cycling
Mixed Flowing Gas
Temperature Life
Rev A
NOTE
Shall meet visual requirements, show no physical damage, and shall meet
requirements of additional tests as specified in the Test Sequence in Figure 2.
Requirement
See note (a).
See Note.
See Note.
See Note.
AWG
Wire
Size
10
12
14
16
ENVIRONMENTAL
Figure 1 (end)
Minimum Crimp
Pounds
Tensile
150
130
70
50
Procedure
Determine crimp tensile at a rate of
1 inch/minute; Test Specification
109-16.
Mate and unmate contacts
assembled in housing for 500
cycles (gold and silver) and 250
cycles for (tin-lead) at a maximum
rate of 300 cycles per hour;
Test Specification 109-27.
Subject mated contacts assembled
in housing to 10 humidity-
temperature cycles between 25°
and 65° C at 95% RH,
Test Specification 109-23-4,
cond B
Subject mated contacts assembled
in housings to class III for 20 days;
Test Specification 109-85-3.
Subject mated contacts assembled
in housings to a maximum rated
temperature for 240 hours; Test
Specification 109-43.
108-10037
3 of 6