104480-7 TE Connectivity, 104480-7 Datasheet - Page 3

• Manufacturer Part Number: 104480-7
• Description: CONTACT, RECEPTACLE, 26-22AWG, CRIMP
• Manufacturer: TE Connectivity
• Series: MTEr

Specifications of 104480-7

• Connector Type: Contact, Crimp
• Current Rating: 3A
• Contact Plating: Tin
• Contact Material: Copper
• Contact Termination: Crimp
• Rohs Compliant: No
• Contact Gender: Socket
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 0.64 – 1.52 [0.025 – 0.060]
• Connector Series: Short Point
• With Insulation Support: Yes
• Applied Pressure: Standard
• Contact - Rated Current (a): 3
• Voltage Rating (vac): 300
• Termination Resistance (m?): 12
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 750
• Crimp Area Plating: Tin-Lead over Nickel
• Wire Range (mm [awg]): 0.12-0.40² [26-22]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Copper Alloy C7025
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Applies To: Wire/Cable
• Packaging Method: Loose Piece
• For Use With: AMPMODU Short Point Connectors

Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev A
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
9 ounces maximum for gold
contacts.
21 ounces maximum for tin
contacts.
1.5 ounces minimum.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples at maximum rate of 1 inch
per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples at maximum rate of 1 inch
per minute.
TE Spec 109-22.
Subject mated samples to 5 cycles
between -65 and 105° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 500
hours.
TE Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1472
3 of 6