1877852-2 TE Connectivity, 1877852-2 Datasheet - Page 3

• Manufacturer Part Number: 1877852-2
• Description: CIRCULAR CONNECTOR, PLUG, 10POS, CABLE
• Manufacturer: TE Connectivity

Specifications of 1877852-2

• Connector Type: Circular Industrial
• Connector Body Material: Thermoplastic
• Gender: Plug
• Contact Gender: Pin
• Connector Mounting: Cable
• No. Of Contacts: 10
• Contact Termination: Solder
• Rohs Compliant: Yes
• Product Type: Connector
• Number Of Positions: 10
• Cable Diameter Range: 6.4
• Strain Relief Type: Overmold
• O-ring Material: Elastomer
• Contact Finish: Gold over Nickel
• Contact Base Material: Brass
• Connector Style: Plug
• Housing Color: Black
• Alignment Keyed: 80°
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Hand solderable with lead free solder
• Rohs/elv Compliance History: Always was RoHS compliant

Solderability, dip test.
Vibration, random .
Mechanical shock.
Durability.
Mating force.
Unm ating force.
Therm al shock.
Hum idity/tem perature cycling.
Tem perature life.
Rev B
Test Description
Solderable area shall have a
m inim um of 95% solder coverage.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
13 N [3 lbf] m axim um .
3 N [0.7 lbf] m inim um .
See Note.
See Note.
See Note.
Figure 2 (continued)
ENVIRONMENTAL
MECHANICAL
Requirem ent
EIA-364-13.
EIA-364-52, Class 2, Category 3.
Subject loose piece contacts to
solderability. Insert solder cup into
solder bath at a 15 to 20 degree
angle with solder cup facing
upward.
EIA-364-28, Test Condition VII,
Condition Letter D.
Subject m ated specim ens to 3.10
G's rm s between 20 to 500 Hz.
Fifteen m inutes in each of 3
m utually perpendicular planes.
EIA-364-27, Method H.
Subject m ated specim ens to 30 G's
half-sine shock pulses of 11
m illiseconds duration. Three shocks
in each direction applied along 3
m utually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unm ate specim ens for
2500 cycles at a m axim um rate of
500 cycles per hour.
Measure force necessary to m ate
specim ens at a m axim um rate of
12.7 m m [0.5 in] per m inute.
EIA-364-13.
Measure force necessary to unm ate
specim ens at a m axim um rate of
12.7 m m [0.5 in] per m inute.
EIA-364-32.
Subject m ated specim ens to 5
cycles between -50 and 170°C.
EIA-364-31, Method III.
Subject m ated specim ens to 10
cycles (10 days) between 25 and
65°C at 80 to 100% RH.
EIA-364-17, Method A, Test
Condition 4, Test Tim e Condition C.
Subject m ated specim ens to 105°C
for 500 hours.
Procedure
108-2249
3 of 5