TWR-MCF51QM-KIT Freescale Semiconductor, TWR-MCF51QM-KIT Datasheet - Page 11

• Manufacturer Part Number: TWR-MCF51QM-KIT
• Description: MCF51QM Tower Kit
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®, Flexis™r
• Type: MCUr

Specifications of TWR-MCF51QM-KIT

• Rohs Compliant: YES
• Contents: 4 Boards, Cable, DVD
• Peak Reflow Compatible (260 C): Yes
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: MCF51QM128

2.6 Accelerometer
An MMA8451Q digital accelerometer is connected to the MCF51QM MCU through an I2C interface
(I2C0, PTC6 and PTC7) and two GPIO/IRQ signals (PTD0 and PTD1).
Figure 7. Accelerometer Circuit
2.7 Potentiometer, Pushbuttons, LEDs
The TWR-MCF51QM features one pushbutton switch (SW1) connected to the IRQ signal (PTB0), one
pushbutton switch (SW2) connected to the master reset signal (PTC1), two capacitive touch pad
electrodes connected to TSI0_CH10 (PTB1) and TSI0_CH9 (PTE1), two user-controllable LEDs—one
green and one orange—connected to GPIO signals (PTC5 and PTA0), and a potentiometer connected to
an ADC input signal (ADC0_SE12, PTD5). Refer to Table 4 “I/O Connectors and Pin Usage Table” for
more information.
2.8 Microphone
A microphone circuit is provided allowing for sampling of audio data. A single-ended ADC signal
(ADC0_SE11, PTD4) is used to sample the value on the microphone IC output. A jumper, J4, is provided
to isolate the ADC signal from the microphone so that it can be used for other purposes (refer to Table
4 “I/O Connectors and Pin Usage Table” for more information).
TWRMCF51QMUM
TWR-MCF51QM Tower Module User's Manual
Page 11 of 18