PIC18F66K22-I/PT Microchip Technology, PIC18F66K22-I/PT Datasheet - Page 185

• Manufacturer Part Number: PIC18F66K22-I/PT
• Description: 64kB Flash, 4kB RAM, 1kB EE, NanoWatt XLP, GP 64 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F66K22-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

12.10 PORTJ, TRISJ and
PORTJ is an 8-bit wide, bidirectional port. The
corresponding Data Direction and Output Latch registers
are TRISJ and LATJ.
All pins on PORTJ are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
When the external memory interface is enabled, all of
the PORTJ pins function as control outputs for the inter-
face. This occurs automatically when the interface is
enabled
(MEMCON<7>). The TRISJ bits are also overridden.
 2010 Microchip Technology Inc.
Note:
Note:
LATJ Registers
by
PORTJ is available only on 80-pin devices.
These pins are configured as digital inputs
on any device Reset.
clearing
the
EBDIS
control
Preliminary
bit
PIC18F87K22 FAMILY
Each of the PORTJ pins has a weak internal pull-up.
The pull-ups are provided to keep the inputs at a known
state for the external memory interface while powering
up. A single control bit can turn off all the pull-ups. This
is performed by clearing bit RJPU (PADCFG1<5>). The
weak pull-up is automatically turned off when the port
pin is configured as an output. The pull-ups are
disabled on any device Reset.
EXAMPLE 12-9:
CLRF
CLRF
MOVLW
MOVWF
PORTJ
LATJ
0CFh
TRISJ
; Initialize PORTJ by
; clearing output latches
; Alternate method
; to clear output latches
; Value used to
; initialize data
; direction
; Set RJ3:RJ0 as inputs
; RJ5:RJ4 as output
; RJ7:RJ6 as inputs
INITIALIZING PORTJ
DS39960B-page 185