8-338069-4 TE Connectivity, 8-338069-4 Datasheet - Page 4

• Manufacturer Part Number: 8-338069-4
• Description: MICRO-MATCH SMD FTE
• Manufacturer: TE Connectivity
• Series: Micro-MaTchr

Specifications of 8-338069-4

• Pitch Spacing: 1.27mm
• No. Of Rows: 1
• No. Of Contacts: 14
• Gender: Receptacle
• Contact Termination: Surface Mount Vertical
• Contact Plating: Tin
• Contact Material: Phosphor Bronze
• Rohs Compliant: Yes
• Product Type: Connector
• Type Of Connector: Female-On-Board
• Mount Angle: Vertical
• Pcb Mount Style: Surface Mount
• Mating Connector Lock: With
• Polarization: With
• Number Of Positions: 14
• Locking Latch: With
• Centerline (mm [in]): 1.27 [0.050]
• Vacuum Tape: With
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Entry Style: Top
• Housing Color: Red
• Housing Material: PA 4.6
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Packaging Method: Reel
• Packaging Quantity: 900

.
Note: The Micro-MaTch male-on-wire connector is specifically designed to be disengaged from its
counterpart by pulling the cable in the appropriate direction.
3.5
3.5.1
The AMP Micro-MaTch connectors with IDC (insulation displacement connector) are designed for the
application of ribbon cable with the following dimensions and properties:
3.5.2
The Micro-MaTch COSI connector is designed for untwisted discrete wires in the range from 20-28 AWG.
3.6
Ratings:
−
−
−
−
−
Rev. F
R6-77 (Rev. 07-01)
- cable style
-conductor spacing
- conductor diameter :solid 0,30 mm
- insulation type
- insulation diamter
- Maximum insulation diameter for wires between 20-24 AWG is ∅ 0.76 mm
- Maximum insulation diamter for wires between 24-28 AWG is ∅ 1.27 mm
Temperature:
Current rating:
Voltage rating:
Test conditions:
Ribbon cable specification
COSI- cable specification
Ribbon cable and wire Specification
Performance and Test description
:AWG 28, UL style 2651
:1,27 nn (0,50”)
: semi rigid PVC
: 0,9 mm ± 0,1 mm
stranded 7*0,12-0,13 mm
-40°C to 105°C.
Followed test procedure: IEC 512-3
For current carrying capacity see derating curves
100 Volts DC or alternating current peak.
Unless specifically stated, tests and examinations required by this
specification shall be executed under any combination of conditions
as specified in IEC 68-1, clause 5.3
continuous operation throughout an ambient temperature range of
108-19052
Page 4 of 15