787615-1 TE Connectivity, 787615-1 Datasheet - Page 3

• Manufacturer Part Number: 787615-1
• Description: BAT INT,INS ASY W/TAB,5P,12.0V
• Manufacturer: TE Connectivity

Specifications of 787615-1

• Rohs Compliant: YES
• Number Of Positions / Contacts: 5
• Contact Plating: Nickel
• Contact Material: Copper Alloy
• Housing Material: Polycarbonate
• Product Type: Connector
• Connector Type: Housing
• Type Of Connector: Battery Interconnect
• Mount Angle: Right Angle
• Pcb Mount Retention: Without
• Mounting Holes: Without
• Voltage (vac): 12
• Number Of Positions: 5
• Centerline (mm [in]): 5.00 [0.197]
• Weld Tab: With
• Contact Type: Socket
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Nickel
• Connector Style: Receptacle
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

Contact retention.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Rev B
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
Contacts shall not dislodge from
connector housing.
8 Newtons maximum per contact.
1 Newton minimum per contact.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-30.
Apply load of 10 Newtons to
contacts.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples a distance of 3mm for
mating orientation 1 and 5mm for
mating orientation 2 from point of
initial contact at maximum rate of
1.5mm per second.
See Figure 6.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples at maximum rate of 1.5mm
per second.
TE Spec 109-22.
Subject mated samples to 25 cycles
between -30 and 105° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 480
hours.
Procedure
108-1501
3 of 8