776494-3 TE Connectivity, 776494-3 Datasheet - Page 4

• Manufacturer Part Number: 776494-3
• Description: AS 16, 8P PLUG ASSY, KEY 3
• Manufacturer: TE Connectivity

Specifications of 776494-3

• Product Line: AMPSEAL 16
• Product Type: Connector
• Connector Type: Housing
• Mount Angle: Straight
• Mount: Free Hanging
• Mating Retention Type: Latching
• Seal Type: Peripheral and Wire Seals
• Centerline (mm [in]): 4.50 [0.177]
• Number Of Rows: 2
• Row-to-row Spacing (mm [in]): 5.30 [0.209]
• Number Of Positions: 8
• Mating Retention: With
• Fluid Type: Water
• Contact Type: Socket
• Contact Layout: In-Line
• Connector Style: Plug
• Mating Alignment: With
• Housing Color: Yellow
• Mating Alignment Type: Color Coded, Keyed, Terminal Position Assurance
• Housing Material: Thermoplastic - GF
• Environmental Protection: With
• Rohs/elv Compliance: ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was ELV compliant
• Fluid Resistance: Immersion

Rev B
Therm al shock.
Sealing pressure.
Pressure washing.
Chem ical exposure.
Salt exposure.
Steam cleaning.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
3.
See Note.
35 kPa, pre-test, no bubbles.
35 kPa, post-test, no bubbles.
See Note.
See Note.
See Note.
See Note.
Figure 2 (end)
Requirem ent
SAE J2030 6.13.
Subject specim ens to 10 cycles
between -40 and 120°C .with 1 hour
dwells at tem perature extrem es.
EIA-364-2.
Subject specim ens to specified
pressure for 30 m inutes.
SAE J2030 6.5. and SAE J1455
4.5.
Subject specim ens to spray for 3
seconds of a 6 second period for a
total of 375 cycles consisting of a
volum e of 9.46 liters per m inute at a
pressure of 7000 kPa and a
tem perature of 40°C from a
distance of 20 to 30 cm . No
detergent.
SAE J2030 6.14.
Subject specim ens to 5 cycles of a
5 m inute dip in the following
chem icals followed by air drying for
24 hours:
1) Diesel fuel at 60 ± 3°C;
2) Engine oil at 100 ± 3°C;
3) Transm ission drive train oil at
100 ± 3°C;
4) Final drive axle oil at 100 ± 3°C;
5) Ethylene glycol (50%) and water
(50%) at 100 ± 3°C;
6) Propylene glycol (50%) and
water (50%) at 100 ± 3°C;
7) Brake fluid at 25 ± 3°C.
SAE J2030 6.12. and ASTM B117.
Subject specim ens to a 5% salt
solution at 35°C for 96 hours.
SAE J1455 4.5.
Subject specim ens 375 cycles
lasting 18.75 m inutes of pressure
washing at 85°C consisting of a
volum e of 9.46 liters per m inute at a
pressure of 1400 kPa from a
distance of 20 to 30 cm . No
detergent.
Procedure
108-2184
4 of 6