5536254-3 TE Connectivity, 5536254-3 Datasheet - Page 3

• Manufacturer Part Number: 5536254-3
• Description: 080,VT,RC,BD,BD,30AU,125ST
• Manufacturer: TE Connectivity
• Series: 5536254r

Specifications of 5536254-3

• Number Of Positions / Contacts: 80
• Product Type: Connector
• Mount Angle: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: Without
• Guides: Without
• Flame Retardant: Yes
• Bus Bar Material: Phosphor Bronze
• Tail Length (mm [in]): 3.18 [0.125]
• Bus Bar Mating Area Plating: Gold (30)
• Bus Bar Termination Area Plating: Matte Tin with Nickel underplated
• Number Of Positions: 80
• Signal Contact Material: Phosphor Bronze
• Signal Contact Mating Area Plating: Gold (30)
• Signal Contact Termination Area Plating: Matte Tin with Nickel underplated
• Connector Style: Receptacle
• Housing Material: High Temperature Thermoplastic
• Stack Height (mm [in]): 10.92 [0.430], 18.75 [0.738]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant

Mating force.
Unm ating force.
Durability.
Therm al shock.
Hum idity-tem perature cycling.
Mixed flowing gas.
Tem perature life.
Rev A
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 3.
8 pounds m axim um per 1 inch of
connector.
(1 inch equals 40 signal and 2
ground contacts)
2 pounds m inim um per 1 inch of
connector.
(1 inch equals 40 signal and 2
ground contacts)
See Note.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
Measure force necessary to m ate
connector assem blies using free
floating fixtures at rate of 1 inch per
m inute.
TE Spec 109-42, Condition A.
Measure force necessary to unm ate
connector assem blies at rate of 1
inch per m inute.
TE Spec 109-42, Condition A.
Mate and unm ate connector
assem blies for 50 cycles at
m axim um rate of 600 cycles per
hour.
TE Spec 109-27.
Subject m ated connectors to 5
cycles between -65 and 125 C.
TE Spec 109-22.
Subject m ated connectors to 10
hum idity-tem perature cycles
between 25 and 65 C at 95% RH.
TE Spec 109-23-3, Condition B.
Subject m ated connectors to
environm ental class III for 20 days.
TE Spec 109-85-3.
Subject m ated connectors to
tem perature life at 105 C for 500
hours.
TE Spec 109-43.
Procedure
108-1272
3 of 8