4-647630-1 TE Connectivity, 4-647630-1 Datasheet - Page 3

• Manufacturer Part Number: 4-647630-1
• Description: 11P MTA100 HRD ASSY F/L LF
• Manufacturer: TE Connectivity

Specifications of 4-647630-1

• Connector Type: Header
• Product Line: MTA-100
• Pcb Mounting Orientation: Right Angle
• Right Angle Bending Side: Front
• Pcb Mount Retention: Without
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Mating Connector Lock Type: Friction Lock
• Post Size (mm [in]): 0.64 [.025]
• Panel Mount Retention: Without
• Mating Post Length (mm [in]): 7.37 [0.290]
• Current Rating (a): 5
• Voltage Rating (vac): 250
• Solder Tail Contact Plating: Tin
• Termination Post Length (mm [in]): 3.56 [0.140]
• Number Of Positions: 11
• Centerline (mm [in]): 2.54 [0.100]
• Narrow: No
• Post Number(s) Omitted: None
• Solder Tail Contact Material: Copper Alloy
• Contact Type: Pin
• Contact Shape: Square
• Contact Plating, Mating Area, Material: Tin
• Contact Base Material: Copper Alloy
• Connector Style: Plug
• Housing Color: Black
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-0
• Housing Material: Thermoplastic - GF
• Backwall/post Interruption(s): Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application Use: Wire-to-Board

Vibration, sinusoidal.
Physical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev H
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
2 pounds maximum average per
contact.
0.8 pound minimum average per
contact.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-21-1.
Subject mated samples to 10-55-10
Hz traversed in 1 minute at .06 inch
total excursion. 2 hours in each of 3
mutually perpendicular planes.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
TE Spec 109-27.
Manually mate and unmate
samples with friction lock header for
25 cycles.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples with friction lock header
from point of initial contact to depth
of .200 inch at maximum rate of .5
inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples from friction lock header at
maximum rate of .5 inch per minute.
TE Spec 109-22.
Subject mated samples to 25 cycles
between -55 and 105° C.
AMP Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
AMP Spec 109-43.
Subject mated samples to
temperature life at 85° C for 1000
hours.
AMP Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1050
3 of 9