4-1601009-4 TE Connectivity, 4-1601009-4 Datasheet - Page 2

• Manufacturer Part Number: 4-1601009-4
• Description: PC TAB STANDARD SIAMEZE
• Manufacturer: TE Connectivity

Specifications of 4-1601009-4

• Product Type: Terminal
• Terminal Configuration: Posted
• Specials: Standard
• Tab Hole/dimple: None
• Tab Size (mm [in]): 1.02 x 0.51 [.040 x .020]
• Magnet Wire Range (mm [awg]): 0.16 – 1.02 [18 – 34]
• Length (mm [in]): 8.76 [0.345]
• Plating Material: Post Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece

3.3.
3.4.
Initial exam ination of product.
Final exam ination of product.
Low Level Contact Resistance
(LLCR).
Current cycling.
Retention force.
Therm al shock.
Hum idity/tem perature cycling.
Rev B
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions. All electrical and environm ental tests shall be perform ed with the term inals inserted into a
Tyco Electronics bobbin with a connection configuration per Figure 3.
Test Requirem ents and Procedures Sum m ary
Test Description
Meets visual requirem ents.
Meets requirem ents of product
drawing.
20% m axim um increase from initial
LLCR reading.
See Figure 3.
See Figure 4.
45 N [10 lbf] m inim um for single
barb.
90 N [20 lbf] m inim um for m ultiple
barb.
See Note 1.
65 N [15 lbf] m inim um for stranded
lead wire with Lead Lok.
See Note 2.
See Note 3.
See Note 3.
Figure 1 (continued)
ENVIRONMENTAL
MECHANICAL
ELECTRICAL
Requirem ent
EIA-364-18.
EIA-364-55, Test Condition A, Test
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
Visual inspection.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
Method 2.
Subject specim ens to 100% of rated
current for wire size being tested for
250 cycles of 15 m inutes ON and
15 m inutes OFF.
EIA-364-8.
Determ ine retention force at a
m axim um rate of 25.4 m m [1 in] per
m inute.
EIA-364-32.
Subject specim ens to 25 cycles
between -40 and 125 C.
EIA-364-31, Method III.
Subject specim ens to 10 cycles (10
days) between 25 and 65 C at 80 to
100% RH.
Procedure
108-2085
2 of 5