314U-BOX 3M, 314U-BOX Datasheet - Page 3

• Manufacturer Part Number: 314U-BOX
• Description: IDC Connector (Boxed)
• Manufacturer: 3M
• Type: IDCr

Specifications of 314U-BOX

• Brand/series: Scotchlok™
• Color: White
• Contact Plating: Tin
• Insulation Type: Nylon
• Length, Overall: 0.95 "
• Material, Contact: Brass
• Number Of Contacts: 3
• Package Quantity: 50⁄Box, 500⁄Case
• Primary Type: Pigtail
• Termination: Wire
• Width, Overall: 0.92 "
• Wire Size: 22-14 AWG
• Wire, Awg: 22-14

Scotchlok
Self-Stripping Electrical
Pigtail Connectors
Data Sheet
Application
Use Part No. 314U to electrically connect two or three
wire ends and insulate the connection.
Wire Range
22-14 AWG Solid or stranded, tinned or untinned
(0,5-1.5 mm
common thermoplastic insulated wires: T, TF, TFF,
TFN, TFFN, AWM, TEW, SAE-GPT with a maximum
insulation diameter of .150 inches (3,8 mm). Maximum
recommended current for general purpose applications:
22 AWG - 3 AMPS, 20 AWG - 5 AMPS, 18 AWG -
7 AMPS, 16 AWG - 10 AMPS, 14 AWG - 15 AMPS.
Construction
U-contact - Tin plated brass, .02 in. (0,5 mm) thick
Insulator - Flame retardant nylon,
Weight
.0069 lb. (3.14 gm)
Recommended Installation Tools
3M
Mechanics (slip joint) Pliers
™
Crimping Tool No. E-9BM
Color - cap/white, body/white
2
) copper conductors. For use with
™
314U
Installation Instructions
1. Insert 2 or 3 unstripped wires completely into
2. Hold tool perpendicular to the wires and make the
Regulatory Agencies
UL Listed - Tested per UL Standard 486C
UL file No. E23438
CSA certified - CSA Std. C22.2 No. 0. 188-MI983
CSA File No. LR15503
(Voltage rated at 600 volts maximum, building wire:
1000 volts maximum, signs, fixtures and luminaires.
Operating Temperature: 105˚C.)
Note: UL Listed and CSA Certified for AWG only.
connector and check their position by looking
through the translucent connector body.
connection by driving the cap down flush with the
top edge of the connector body.
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.