3-647008-3 TE Connectivity, 3-647008-3 Datasheet - Page 2

• Manufacturer Part Number: 3-647008-3
• Description: 03P MTA100 PSTD CONN ASSY LF
• Manufacturer: TE Connectivity

Specifications of 3-647008-3

• Connector Type: Connector Assembly
• Connector Design: Closed End
• Product Line: MTA-100
• Termination Method To Wire/cable: IDC Standard
• Wire Size (mm² [awg]): 0.3-0.4² [22]
• Mating Connector Lock: Without
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Panel Mount Retention: Without
• Voltage Rating (vac): 250
• Solder Tail Contact Plating: Matte Tin
• Number Of Positions: 3
• Centerline (mm [in]): 2.54 [0.100]
• Narrow: No
• Post Number(s) Omitted: None
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold (30) or (30) Total Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Connector Style: Receptacle
• Housing Color: Red
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-2
• Housing Material: Nylon
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Application Use: Wire-to-Wire

3.2.
3.3.
3.4.
3.5.
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Termination tensile strength,
parallel.
Rev D
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: See Figure 4 for applicable current carrying capability
Temperature:
-55 to 105° C
Meets requirements of product
drawing and Application
Specification 114-1019.
16 milliohms maximum initial.
∆R 10 milliohms maximum.
5000 megohms minimum initial.
One minute hold with no breakdown
or flashover.
30° C maximum temperatur e rise at
specified current.
Wire Size Slot Tensile, Minimum
AWG
28
26
24
22
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
17.8
26.7
35.6
53.4
N
[lbf]
12
4
6
8
Visual, dimensional and functional
per applicable quality inspection
plan.
TE 109-6-6.
Subject samples to 20 millivolts
maximum open circuit voltage at
100 milliamperes maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent contacts of
unmated samples.
TE Spec 109-29-1.
750 volts AC at sea level.
Test between adjacent contacts of
unmated samples.
TE Spec 109-45-2.
Measure temperature rise vs
current.
See Figure 4.
TE Spec 109-16.
Determine slot tensile at a
maximum rate of 25.4 mm [1 in] per
minute.
See Figure 5.
Procedure
108-1050-1
2 of 11