3-111623-1 TE Connectivity, 3-111623-1 Datasheet - Page 3

• Manufacturer Part Number: 3-111623-1
• Description: 012 2MM CTR 30DP FT
• Manufacturer: TE Connectivity
• Series: 2.0 [.079] AMP-LATCHr

Specifications of 3-111623-1

• Product Line: AMP-LATCH
• Connector Type: Connector Assembly
• Termination Method To Wire/cable: IDC
• Ul File Number: E28476
• Csa File Number: LR 7189
• Contact - Rated Current (a): 0.5
• Operating Voltage Reference: AC
• Operating Voltage (vac): 125
• Wire/cable Size (awg): 28
• Wire/cable Size (mm²): 0.08
• Wire/cable Size (cma): 158
• Profile Height (y-axis) (mm [in]): 8.48 [0.3339]
• Number Of Positions: 12
• Centerline (mm [in]): 2.00 [0.079]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Rows: 2
• Mating Retention: Without
• Length (x-axis) (mm [in]): 17.15 [0.6752]
• Width (z-axis) (mm [in]): 5.58 [0.2197]
• Contact Design: Single Beam
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold or Palladium Nickel or Performance Based
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.762 [30]
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Polarization
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 125
• Operating Temperature (°c [°f]): -65 – +105 [-85 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.71 – 0.87 [0.028 – 0.034]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Tube

Mating force.
Unmating force.
Durability.
Thermal shock.
Humidity/temperature cycling.
Mixed flowing gas.
Temperature life.
Rev C
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and shall meet the requirements of
additional tests as specified in the Product Qualification Test Sequence in Figure 2.
1.67 N [6 ozf] maximum per contact. TE Spec 109-42, Condition A.
0.14N [0.5 ozf] minimum per
contact.
See Note.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
Measure force necessary to mate
connector assemblies with locking
latches a distance of 4 mm [.157 in]
from the point of initial contact using
free floating fixtures at rate of 2.54
cm [1 in] per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
connector assemblies with locking
latches removed or released at rate
of 2.54 cm [1 in] per minute.
TE Spec 109-27.
Mate and unmate connector
assemblies for 150 cycles at rate of
150 cycles per hour.
TE Spec 109-22.
Unless limited by temperature rating
of cable used, subject mated
connectors to 5 cycles between -65
and 105°C.
TE Spec 109-23-3, Condition B.
Subject mated connectors to 10
humidity-temperature cycles
between 25 and 65°C at 95% RH.
TE Spec 109-85-2.
Subject mated connectors to
environmental Class III for 20 days.
TE Spec 109-43.
Subject mated connectors to a
temperature of 105°C for 96 hours.
Procedure
108-1372
3 of 6