... D Sub Connectors. 3M assembly equipment is offered to help reduce set-up ™ time, to provide easier and faster assembly and to help reduce assembly error. The 3M Locator Plate 3443-112 and 3M Platen 3442-44 were designed to assemble the D Sub Connector 8250. The Locator Plate 3443-112 is used with the 3M ...
... Procedures for Adjusting Shut Height 3.1 The shut height should be adjusted from the base before the locator plate is put into place. The 3M Assembly Presses 3316 and 3640 are adjusted with a knob at the top of the press. The 3M Press 3335 is adjusted with the collar on the press shaft, and the 3M adjusting ...
... Place the cable/cover sub assembly between the guides on the locator plate, cover side down. (See Figure 7) 4.4 Position and orient connector body, contacts down, over the cable/cover sub-assembly, aligning with the body. (See Figure 7) Figure 4: 3M Assembly Press 3335 ™ Figure 5 Figure 6 Figure 7 3 ...
... Since these factors are uniquely within the user’s knowledge and control essential that the user evaluate the 3M product to determine whether it is fi t for a particular purpose and suitable for the user’s application. Warranty; Limited Remedy; Limited Liability. ...