208488-3 TE Connectivity, 208488-3 Datasheet - Page 2
![CMC PLUG ASSEMBLY,SZ 22](/photos/42/2/420281/prcpc42b_sml.jpg)
208488-3
Manufacturer Part Number
208488-3
Description
CMC PLUG ASSEMBLY,SZ 22
Manufacturer
TE Connectivity
Specifications of 208488-3
Rohs Compliant
YES
Connector Type
Housing
Mount
Free Hanging
Mount Angle
Straight
Shell Size
22
Shell Type
Metal
Product Series
Series 1
Thread Size
1-3/16 - 18 UNEF-2A
Sealed
Yes
Mating Retention Type
Threaded Coupling
Vde Tested
No
Seal Type
Tetraseal
Number Of Positions
16
Number Of Signal Positions
16
Contact Type
Socket
Reverse Gender
Standard
Connector Style
Plug
Mating Alignment Type
Keyed
Housing Material
Thermoplastic - GF
Housing Color
Black
Ul Flammability Rating
UL 94V-0
Environmental Protection
With
Reverse Numbering
Without
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Fluid Resistance
Immersion
Accepts Wire Insulation Diameter, Range (mm [in])
2.54 [0.100]
2.3.
3.
3.1.
3.2.
3.3.
3.4.
3.5.
Examination of Product
Termination Resistance,
Dry Circuit
Dielectric Withstanding Voltage
Insulation Resistance
Shell Resistance (c)
Vibration (b)
Physical Shock (b)
Rev A
Military Specification
MIL-W-16878/4:
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable
product drawing.
Materials
A.
B.
Ratings
A.
B.
Performance and Test Description
The product is designed to meet the electrical, mechanical and environmental performance
requirements specified in Figure 1. All tests are performed at ambient temperature unless
otherwise specified.
Test Requirements and Procedures Summary
Test Description
Test Description
Shell:
Insert:
Current: Maximum current shall be determined by contacts used, see Para 3.5 (a) and Figure 5.
Operating temperature: -55° to 125°C
Zinc or aluminum alloy, nickel plated over copper
Thermoplastic, black, UL 94V-0
Wire, Electrical, Insulated, High Temperature
Meets requirements of product
drawing and applicable TE
Application Specification.
See Figure 5 for maximum
resistance values
1.5 kvac (rms) dielectric
withstanding voltage. 1 minute
hold. 2 milli- amperes maximum
leakage current.
5000 megohms minimum.
.05 ohms maximum DC. resistance
from rear of plug to receptacle
square flange.
No discontinuities greater than 10
microseconds.
No discontinuities greater
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
Subject mated contacts assembled
in housing to 50 mv open circuit at
100 ma maximum, see Figure 6;
Test Specification 109-6-1.
Test between adjacent contacts of
mated connector and contacts to
shell; Test Specification 109-29-1.
Test between adjacent contacts of
mated connector assembly and
contacts to shell; Test Specification
109-28-4.
Apply .1 ampere maximum to
mated connector. Probes shall not
puncture or damage finish
Subject mated connectors to 15
G's, 10-2000 Hz with 100 ma
current applied;
Test Specification 109-23-3.
Subject mated connectors to 50
Procedure
Procedure
108-10040
2 of 7