2-103639-9 TE Connectivity, 2-103639-9 Datasheet - Page 5

• Manufacturer Part Number: 2-103639-9
• Description: 10 MTE HDR SRST LATCH .100CL
• Manufacturer: TE Connectivity

Specifications of 2-103639-9

• Product Type: Connector
• Connector Type: Header
• Post Size (mm [in]): 0.64 [.025]
• Pcb Mounting Orientation: Vertical
• Termination Method To Wire/cable: Crimp, Insulation Displacement Crimp (IDC)
• Pcb Mount Style: Through Hole
• Pcb Mount Retention: Without
• Connector Series: MTE
• Solder Tail Contact Plating: Bright Tin
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Positions: 10
• Number Of Rows: 1
• Contact Type: Pin
• Pcb Orientation Feature: No
• Contact Plating, Mating Area, Material: Bright Tin
• Contact Base Material: Brass
• Contact Shape: Square
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Latched
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Thermoplastic - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c): -65 – +105
• Applies To: Printed Circuit Board
• Packaging Method: Tube

4.
4.1.
4.2.
4.3.
4.4.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that product m eets requirem ents of Figure 1. Failures attributed to
equipm ent, test setup or operator deficiencies shall not disqualify product. W hen product failure occurs,
corrective action shall be taken and sam ples resubm itted for qualification. Testing to confirm corrective
action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan will specify sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with applicable product drawing and
this specification.
Sam ple Selection
Sam ples shall be prepared in accordance with applicable Instruction Sheets and shall be selected
at random from current production. All test groups shall consist of a m inim um of 5 assem blies with
a m inim um of 30 contacts each.
Test Sequence
Qualification inspection shall be verified by testing sam ples as specified in Figure 2.
108-25034
5 of 6