111196-7 TE Connectivity, 111196-7 Datasheet - Page 3

• Manufacturer Part Number: 111196-7
• Description: WIRE-BOARD CONN RECEPTACLE 30POS, 1.27MM
• Manufacturer: TE Connectivity
• Series: AMPMODU System 50 Seriesr

Specifications of 111196-7

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Connector Type: Wire-to-Board
• Rohs Compliant: No
• Product Type: Free Hanging Receptacles
• Pitch: 2.54 mm
• Number Of Positions / Contacts: 30
• Mounting Style: Cable
• Housing Material: Thermoplastic, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Voltage Rating: 30 VAC
• Current Rating: 0.5 A
• Termination Style: IDC
• Wire Type: Ribbon Cable
• Type Of Connector: Rectangular
• Mating Connector Lock: With
• Wire/cable Type: Ribbon Cable
• Mating Connector Lock Type: Latch
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Contact - Rated Current (a): 0.5
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 30
• Number Of Rows: Dual
• Ribbon Cable Centerline Spacing (mm [in]): 0.64 [0.025]
• Latch Material: Stainless Steel
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Connector Style: Receptacle
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Applies To: Cable
• Temperature Range (°c): -65 – +105
• Lead Free Status / Rohs Status: No

Rev B
Mechanical shock.
Durability (receptacles).
Mating force (receptacles).
Unmating force (receptacles).
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas (receptacles).
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
1.11 N [4 oz] maximum per contact. EIA-364-13.
0.14 N [.5 oz] minimum per contact. EIA-364-13.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-27,
Method A.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Mate and unmate specimens for
150 cycles at a maximum rate of
150 cycles per hour.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
Measure force necessary to
unmate specimens at a maximum
rate of 12.7 mm [.5 in] per minute.
EIA-364-32,
Test Condition II.
Subject unmated specimens to 5
cycles between -65 and 105° C.
EIA-364-31,
Method III.
Subject unmated specimens to 10
cycles (10 days) between 25 and
65° C at 80 to 100% RH.
EIA-364-17,
Method A,
Test Condition 4,
Test Time Condition C.
Subject mated and terminated
specimens to 105° C for 500 hours.
EIA-364-65,
Class II.
Subject mated specimens to
environmental Class II for 20 days.
Procedure
108-1109
3 of 6