111196-6 TE Connectivity, 111196-6 Datasheet - Page 4

• Manufacturer Part Number: 111196-6
• Description: WIRE-BOARD CONN RECEPTACLE 26POS, 1.27MM
• Manufacturer: TE Connectivity
• Series: AMPMODU System 50 Seriesr

Specifications of 111196-6

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Connector Type: Wire-to-Board
• Rohs Compliant: No
• Product Type: Free Hanging Receptacles
• Pitch: 2.54 mm
• Number Of Positions / Contacts: 26
• Mounting Style: Cable
• Housing Material: Thermoplastic, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Voltage Rating: 30 VAC
• Current Rating: 0.5 A
• Termination Style: IDC
• Wire Type: Ribbon Cable
• Type Of Connector: Rectangular
• Mating Connector Lock: With
• Wire/cable Type: Ribbon Cable
• Mating Connector Lock Type: Latch
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Contact - Rated Current (a): 0.5
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 26
• Number Of Rows: Dual
• Ribbon Cable Centerline Spacing (mm [in]): 0.64 [0.025]
• Latch Material: Stainless Steel
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Connector Style: Receptacle
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Applies To: Cable
• Temperature Range (°c): -65 – +105
• Lead Free Status / Rohs Status: No

3.6.
4.
4.1.
4.2.
Rev B
Product Qualification and Requalification Test Sequence
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
NOTE
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall consist of a minimum of 5
connectors. A minimum of 6 contact circuits in each connector shall be randomly selected and
identified. Unless otherwise specified, these contacts shall be used for all measurements.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
(a) See paragraph 4.1.A.
(b) Test group is unmated and unterminated.
(c)
(d) Precondition specimens with 10 durability cycles.
Numbers indicate sequence in which tests are performed.
Initial examination of product
Low level contact resistance
Insulation resistance
Withstanding voltage
Vibration
Mechanical shock
Durability
Mating force
Unmating force
Thermal shock
Humidity-temperature cycling
Temperature life
Mixed flowing gas
Final examination of product
Test or Examination
Figure 2
3,7
1
1
5
6
4
2
8
9
Test Sequence (c)
Test Group (a)
3(d)
4(d)
2,5
2
1
6
3(d)
4(d)
2,5
3
1
6
4(b)
2,6
3,7
1
4
5
8
108-1109
4 of 6