104479-9 TE Connectivity, 104479-9 Datasheet

SHORT POINT CONT 15 DPLX STMPD LF

104479-9

Manufacturer Part Number
104479-9
Description
SHORT POINT CONT 15 DPLX STMPD LF
Manufacturer
TE Connectivity
Datasheets

Specifications of 104479-9

Rohs Compliant
YES
Product Type
Contact
Termination Method To Wire/cable
Crimp
Wire Insulation Diameter (mm [in])
0.64 – 1.52 [0.025 – 0.060]
Connector Series
Short Point
With Insulation Support
Yes
Applied Pressure
Standard
Contact - Rated Current (a)
3
Voltage Rating (vac)
300
Termination Resistance (m?)
12
Insulation Resistance (m?)
5,000
Dielectric Withstanding Voltage (v)
750
Crimp Area Plating
Bright Tin
Wire Range (mm [awg])
0.20-0.60² [24-20]
Contact Type
Socket
Contact Plating, Mating Area, Material
Gold (15)
Contact Base Material
Copper Alloy C7025
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Approved Standards
UL E28476, CSA LR7189
Operating Temperature (°c)
-65 – +105
Applies To
Wire/Cable
Packaging Method
Strip

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
104479-9
Manufacturer:
TE
Quantity:
49 538
1.
1.1.
1.2.
2.
2.1.
3.
3.1.
3.2.
3.3.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers performance, tests and quality requirements for the TE Connectivity (TE) short
point power receptacle contact and connector system. This contact is a separable electrical connection
device for mating to .025 inch square posts. It can be crimped to 20 to 32 AWG wire sizes and is
intended to be used with a connector housing with centerline spacing of at least .100 inch.
Qualification
When tests are performed on the subject product line, procedures specified in 109 Series Test
Specifications shall be used. All inspections shall be performed using the applicable inspection plan and
product drawing.
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and referenced documents, this
specification shall take precedence.
TE Documents
!
!
!
!
!
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
Materials
!
!
Ratings
!
!
!
109-1: General Requirements for Test Specifications
109 Series: Test Specifications as indicated in Figure 1
108-1472: Product Specification
114-25038: Application Specification
501-292-1: Qualification Test Report
Contact: Phosphor bronze, duplex gold over nickel plating
Housing: Polyamide, black, glass filled, UL94V-0
Voltage: 300 volts AC
Current: See Figure 4 for applicable current carrying capability
Temperature: -65 to 105° C
| Indicates change
*Trademark
Product
Specification
Connector, Short Point, Power Receptacle Contact, Gold
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1472-1
11Mar11 Rev B
1 of 6
LOC B

Related parts for 104479-9

104479-9 Summary of contents

Page 1

... SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) short point power receptacle contact and connector system. This contact is a separable electrical connection device for mating to .025 inch square posts. It can be crimped AWG wire sizes and is intended to be used with a connector housing with centerline spacing of at least ...

Page 2

Performance and Test Description Product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per Test Specification 109-1. 3.5. Test Requirements ...

Page 3

Product Qualification and Requalification Test Sequence Examination of product Termination resistance Temperature rise vs current Vibration Temperature life Mixed flowing gas (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. (c) Energize at 18° ...

Page 4

Rev B Figure 3 Termination Resistance Measurement Points 108-1472 ...

Page 5

Percent Connector Single Contact To determine acceptable current carrying capacity for percentage connector loading and wire gage NOTE indicated, use Multiplication Factor (F) from above chart and multiply it times Base Rated Current for a single circuit at maximum ambient ...

Page 6

Rev B Figure 5 Vibration & Physical Shock Mounting Fixture 108-1472 ...

Related keywords