DS1013S-50+ Maxim Integrated Products, DS1013S-50+ Datasheet - Page 5
![no-image](/images/manufacturer_photos/0/4/417/maxim_integrated_products_sml.jpg)
DS1013S-50+
Manufacturer Part Number
DS1013S-50+
Description
DELAY LINE 3TAP 50NS 16-SOIC
Manufacturer
Maxim Integrated Products
Datasheet
1.DS1013M-150.pdf
(6 pages)
Specifications of DS1013S-50+
Function
Multiple
Delay To 1st Tap
50nS
Available Total Delays
50, 50, 50ns
Number Of Independent Delays
3
Voltage - Supply
4.75 V ~ 5.25 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.300", 7.5mm Width)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Number Of Taps/steps
-
Tap Increment
-
NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open.
3. V
4. See “Test Conditions” section.
5. The combination of temperature variations from 25°C to 0°C or 25°C to 70°C and voltage variations
6. All output delays tend to vary unidirectionally over temperature or voltage ranges (i.e., if OUT 1
7. Period specifications may be exceeded; however, accuracy will be application-sensitive (decoupling,
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
t
1.5V point on the trailing edge, or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
t
input pulse.
t
input pulse.
t
pulse and the 1.5V point on the leading edge of any tap output pulse.
t
pulse and the 1.5V point on the trailing edge of any tap output pulse.
WI
RISE
FALL
PLH
PHL
for -70 to 100 and ±5% for -150 and longer delays.
from 5.0V to 4.75V or 5.0V to 5.25V may produce an additional delay shift of ±1.5 ns or ±3%,
whichever is greater.
slows down, all other outputs also slow down).
layout, etc.).
(Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the
(Time Delay, Falling): The elapsed time between the 1.5V point on the trailing edge of the input
(Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
(Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
CC
(Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge of the
= 5V @ 25°C. Delays accurate on both rising and falling edges within ±2 ns for -10 to -60, ±3%
5 of 6
DS1013