1-1375820-3 TE Connectivity, 1-1375820-3 Datasheet - Page 3

• Manufacturer Part Number: 1-1375820-3
• Description: CST-100 II HOUSING 13 POS
• Manufacturer: TE Connectivity

Specifications of 1-1375820-3

• Rohs Compliant: YES
• Connector Type: Housing
• Product Line: CST-100 II
• Termination Method To Wire/cable: Crimp
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Panel Mount Retention: Without
• Number Of Positions: 13
• Centerline (mm [in]): 2.54 [0.100]
• Cable Exit Angle: 180°
• Contact Type: Socket
• Connector Style: Receptacle
• Housing Color: White
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Housing Material: Polymer
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application Use: Wire-to-Board

Mechanical shock.
Durability.
Mating force.
Unmating force.
Contact insertion force.
Contact extraction force.
Crimp tensile.
Thermal shock.
Humidity/temperature cycling.
Rev D
Test Description
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
8.9 N [2 lbf] maximum per contact.
See Figure 5.
3.6 N [.80 lbf] minimum per contact.
See Figure 5.
17.8 N [4 lbf] maximum initial per
contact.
23 N [5 lbf] minimum final per
contact.
See Note.
See Note.
Wire Size
(AWG)
22
24
26
Figure 1 (continued)
ENVIRONMENTAL
Requirement
(N [lbf] minimum)
Crimp Tensile
48.9 [11]
44.5 [10]
31.1 [7]
EIA-364-27, Condition A.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Manually mate and unmate
specimens with friction lock headers
for 15 cycles at a maximum rate of
10 cycles per minute.
EIA-364-13,
Condition A.
Measure force necessary to mate
specimens with friction lock headers
a distance of 5.1 mm [.200 in] from
point of initial contact at a maximum
rate of 12.7 mm [0.5 in] per minute.
EIA-364-13,
Condition A.
Measure force necessary to unmate
specimens from friction lock
headers at a maximum rate of 12.7
mm [0.5 in] per minute.
TE Spec 109-41.
Measure force necessary to insert
contact into housing at a maximum
rate of 25 mm [.984 in] per minute.
TE Spec 109-41.
Measure force necessary to extract
contact from housing at a maximum
rate of 50 mm [1.968 in] per minute.
EIA-364-8.
Measure crimp tensile at a
maximum rate of 25.4 mm [1 in] per
minute.
EIA-364-32.
Subject specimens to 10 cycles
between -55 and 105° C.
EIA-364-31.
Subject specimens to 10, 24 hour
cycles between 25 and 65° C at 95%
RH.
Procedure
108-1948
3 of 8