ACA-20PC-3-AC1-RL-C Murata Power Solutions Inc, ACA-20PC-3-AC1-RL-C Datasheet - Page 2

• Manufacturer Part Number: ACA-20PC-3-AC1-RL-C
• Description: AMMETER LED 85-264VAC 50A RED
• Manufacturer: Murata Power Solutions Inc
• Type: Ammeterr
• Series: ACA-20PCr

Specifications of ACA-20PC-3-AC1-RL-C

• Display Type: LED
• Measuring Range: 0 ~ 50.0A
• Display Style: Red Characters, Black Background
• Display Digits: 3.5
• Display Digits - Height: 0.370" (9.40mm)
• Backlight: Without
• Mounting Type: Panel Mount
• Termination: Terminal Block
• Voltage - Supply: 85 ~ 265VAC
• Equipment Type: Digital, LED-Display AC Ammeters with Built-in Current Transformers
• Input: 50 A
• Dimensions: 2.12 in L x 1.38 in W x 0.88 in H
• Mounting Style: Panel
• Primary Voltage Rating: 120 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Display Face Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 811-1100

Performance/Functional Specifi cations
Typical at T
Full-Scale Current
ACA-20PC-1-XXX-XX
ACA-20PC-2-XXX-XX ➂
ACA-20PC-3-XXX-XX
ACA-20PC-4-XXX-XX
DMS-30798-C
Overcurrent Rating ➁
Performance
Sampling Rate
Accuracy ➁
Measurement Type
Temperature Drift (0 = +60°C)
Zero Reading (Vin = 0 Volts)
Dielectric Withstanding Voltage
Power Supply Voltage ➄
ACA-20PC-X-AC1-RL (47-99Hz)
ACA-20PC-X-DC1-RL
Power Supply Current ➃
ACA-20PC-X-AC1-RL (47-99Hz)
ACA-20PC-X-DC1-RL
Power Supply Terminal Block
ACA-20PC-1-AC1-RL and ACA-20PC-2-AC1-RL
(2A and 20A ac-powered models with 4-position terminal blocks):
Wire Size and Type
Insulation Strip Length
Screw Tightening Torque
Maximum Rated Current
Maximum Rated Voltage
ACA-20PC-X-XXX-XX
(All other ac or dc-powered models with 2-position terminal blocks):
Wire Size and Type
Insulation Strip Length
Screw Tightening Torque
Display
Display Type and Size
Overrange Indication
Decimal Point
Physical/Environmental
Operating Temperature
Storage Temperature
Humidity (non-condensing)
A
= +25°C, unless otherwise noted. ➀
(45-450Hz)
➁
“–001”
12-20AWG (solid), 14-20AWG (stranded)
Sine wave input, full-wave averaging,
Min.
20A with 12AWG solid wire; 15A with
+4.75
–40
–
–
–
–
–
–
–
0
0
3½ digit, 0.37"/9.4mm high LED
85
–
–
1.5 x rated full-scale current
14AWG solid or stranded wire
16-24AWG (solid or stranded)
630V (VDE 0110-V. Group 2)
250V (VDE 0110-V Group 3)
4.4 pounds/inches (0.5Nm)
3.6 pounds/inches (0.5Nm)
Fixed, model dependent
2.5 reading per second
±0.15%FS ±6 Counts
“000”
±0.2
±0.4
Typ.
rms calibrated
120
–
–
–
–
–
+8
–
–
–
30
–
0.25 inches
0.25 inches
“1_ _ _”
“001”
1.999
19.99
100.0
Max.
±0.4
50.0
30.0
+60
+75
+40
+12
264
±1
95
50
www.murata-ps.com/dpm
Cnts/°C
Counts
Vdc
mAdc
Units
Amps
Amps
Amps
Amps
Amps
Vdc
Vac
mA
°C
°C
%
➀ The ACA-20PC-1-AC1-RL and ACA-20PC-2-AC1-RL have 4-position on-board
➁ Specifi ed full-scale currents are those passing through the built-in CT's
➁ For the ACA-20PC-2-AC1-RL, if the load is connected to the meter's on-board
➃ All specifi ed maximum power supply currents are steady-state values.
➄ Maximum reverse polarity protection on "DC1" models is –40Vdc.
DMS-30798-C: 30Amp model with a wire lead CT and “-AC1”
power supply specifi cations. See Mechanical section for dimensions.
Accessories: DMS-20-CP Panel cutout punch
A DMS-BZL4-C bezel assembly with sealing gasket is supplied with each ammeter.
Physical/Environmental
Case Material
Dimensions
Weight:
ACA-20PC-1-XXX-XX
ACA-20PC-2-XXX-XX
ACA-20PC-3-XXX-XX
ACA-20PC-4-XXX-XX
DMS-30798-C
Ordering Information
terminal blocks. All other models have 2-position terminal blocks.
primary(load) circuit, over the frequency of 45-450Hz. The Overcurrent Rating
is a continuous rating that applies to the measured ac load current. It does
not apply to any circuitry external to the meter. Accuracy is guaranteed to the
rated current.
4-position terminal block, the 20A full scale range requires 12AWG solid
copper wire on all connections. If 14AWG solid copper wire is used, the current
should be limited to 15A. See Figure 3.
AC-powered models can draw higher surges at initial turn-on.
Input Range:
(45-450Hz)
1 = 1.999A
2 = 19.99A
3 = 50.0A
4 = 100.0A
ACA - 20PC - 1 - AC1 - RL - L - C
Digital, LED-Display AC Ammeters with
Power Supply:
AC1 = 85-264Vac@50/60Hz
DC1 = +5-40Vdc
16 Feb 2011 MPM_ACA_20PC.B08 Page 2 of 6
Built-in Current Transformers
ACA-20PC Series
1.38”W x 0.88”H. Depth is model depen-
dent (see mechanical specifi cation)
LED Color:
email: [e-mail]
RL = Red Standard
BL = Blue Standard
PGL = Green Standard
1.1 ounces (31 grams)
1.1 ounces (31 grams)
1.3 ounces (37 grams)
1.5 ounces (43 grams)
1.0 ounces (28 grams)
Leaded CT (100A model)
Polycarbonate
RoHS