H7EC-NV-BH Omron, H7EC-NV-BH Datasheet - Page 27

• Manufacturer Part Number: H7EC-NV-BH
• Description: COUNTER TOTALIZER DC W/BACKLIGHT
• Manufacturer: Omron
• Series: H7ECr

Specifications of H7EC-NV-BH

• Count Rate: 1kHz
• Number Of Digits/alpha: 8
• Input Type: Voltage
• Voltage - Supply: 24V
• Display Type: LCD Backlit
• Voltage Rating: 4.5 VDC to 30 VDC
• Mounting: Flush Mounting Adapter
• No. Of Digits / Alpha: 8
• Digit Height: 8.6mm
• Counting Speed: 1kHz
• Operating Temperature Range: -10°C To +55°C
• Mounting Type: Flush
• Panel Cutout Width: 45mm
• Length/height, External: 24mm
• Signal Input Type: PNP/NPN DC Voltage
• Counter Supply Voltage: 24VDC
• External Depth: 48.5mm
• External Width: 48mm
• Ip/nema Rating: IP66 / NEMA 4
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: H7ECNVBH; Z1144

Accessories (Order Separately) (Common)
■ New H7E (Except for PCB-mounting Counter)
The New H7E models are supplied with a mounting bracket (Y92F-34) and nut. Additionally, the Y92F-75/-76/-77B Flush Mounting Adapters shown
here allow the New H7E models to be fitted to existing panel cutouts.
Degree of protection (front): IP40 (not waterproof)
The DIP switch of the H7E@-N can be operated in mounted condi-
tion. Vibration resistance and shock resistant are the same level as
the H7E@-N series.
Y92F-35 Compact Flush Mounting Bracket
Y92F-75 Flush Mounting Adapter
for 26 × 45.3 Rectangular Cutout
Use mounting bracket supplied with the Counter
Y92F-76 Flush Mounting Adapter
for 27.5 × 52.5 Rectangular Cutout
Y92F-77B Flush Mounting Adapter
for 24.8 × 48.8 Rectangular Cutout
Use mounting bracket supplied with the Counter
(Color: light gray)
(Color: light gray)
Use the Y92F-76 together with the Y92F-35 Compact
Flush Mounting Bracket.
Do not use the Flush Mounting Adapter supplied with the Counter.
(Color: light gray)
R S T
R S T
26
50
28.8 24.2 22.2
38
31
24.2
24.2 22.2
47.6
22.2
2.4
Two 4.5 dia. countersunk holes
• The minimum mounting interval is 30 mm.
• Do not allow the ambient temperature of the H7E@-N to exceed the
• Mounting is possible onto panels with a thickness of 1 to 5 mm.
53.8
Note: An interval of 40 mm is recommended for easier wiring.
specifications (55°C).
45.2
48.2
45.2
48.2
Two 3.5 dia. mounting holes
60
18.6
48.2
45.2
72
63
4
30 min.
4
Single mounting
4
4
45
+0.5
0
26
38
26
Panel Cutout
27.5
22.2
Note: The mounting panel
Panel Cutout
Panel Cutout
24.8
+0.5
0
Panel cutout
thickness should be
between 1 and 5 mm.
H7E@-N@P
45.3
63
52.5
Two, M4
Dense mounting
(48 × No. of units
− 2.5)
48.8
+1.0
Two, M3
0
22.2
+0.5
27
0