E5GN-Q1T AC100-240 Omron, E5GN-Q1T AC100-240 Datasheet - Page 4

• Manufacturer Part Number: E5GN-Q1T AC100-240
• Description: CONTROL TEMP DGTL VOLT OUT 120V
• Manufacturer: Omron

Specifications of E5GN-Q1T AC100-240

• Operating Temperature Max: 55°C
• Operating Temperature Min: -10°C
• Temperature Accuracy ±: 0.2%
• Output Voltage Max: 13.8VDC
• Output Voltage Min: 10.2VDC
• Meter Function: Thermocouple
• Thermocouple Type: J, K, T, E, L, U, N, R, S, B, W, PLII
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E5GNQ1TAC100240; Z3049

Alarm Type
For the alarm 1, select alarm types out of the 12 alarm types listed in the following table.
*1: With set values 1, 4 and 5, the upper and lower limit values can
*2: Set value: 1, Upper- and lower-limit alarm
*3: Set value: 4, Upper- and lower-limit range
4
0
1
2
3
4
5
6
7
8
9
10
11
Case 1
Case 1
*1
*1
*1
be set independently for each alarm type, and are expressed as
“L” and “H.”
Following operations are for cases when an alarm set point is “X”
or negative.
Set Value
Digital Temperature Controllers
Case 2
Case 2
L H
Alarm function OFF
Upper- and lower-limit (deviation)
Upper-limit (deviation)
Lower-limit (deviation)
Upper- and lower-limit range (deviation)
Upper- and lower-limit with standby se-
quence (deviation)
Upper-limit with standby sequence (de-
viation)
Lower-limit with standby sequence (de-
viation)
Absolute-value upper-limit
Absolute-value lower-limit
Absolute-value upper-limit with standby
sequence
Absolute-value lower-limit with standby
sequence
Alarm Type
Case 3 (Always ON)
Case 3 (Always OFF)
E5GN
=
=
=
=
Output OFF
When X is positive
*4: Set value: 5, Upper- and lower-limit with standby sequence
*5: Set value: 5, Upper- and lower-limit with standby sequence
Same as for the upper- and lower-limit
alarm. However, when the upper-limit
and lower-limit hysteresis overlaps:
Always OFF
*5
Example: When the alarm is set ON at 110 C/ F or higher.
When an alarm type other
than the absolute-value
alarm is selected
(For alarm types 1 to 7)
The alarm value is set as a
deviation from the set point.
Case 1
alarm. Always OFF when the upper-limit and lower-limit hystere-
sis overlaps.
Set the alarm types for alarm 1 and alarm 2 independently in the
initial setting level. The default setting is 2 (upper limit). With the
E5AN/E5EN, perform settings similarly for alarm 3.
Set point
100 C/ F
Alarm value
Alarm Output Operation
Case 2
*2
*3
*4
Example
When the absolute-value
alarm is selected
(For alarm types 8 to 11)
The alarm value is set as
an absolute value from the
alarm value of 0 C/F.
When X is negative
0 C/ F
Alarm value