K32-49HC Omron, K32-49HC Datasheet - Page 7

• Manufacturer Part Number: K32-49HC
• Description: COVER HARD FOR K3MA-F METER
• Manufacturer: Omron

Specifications of K32-49HC

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: K3249HC

Average Processing
Average processing stabilizes the display by minimizing any pulsat-
ing or flicker caused by fluctuations in the pulse width of sensor input
or by eccentricity in rotating shafts.
Hysteresis (Comparative Output
Models Only)
The hysteresis of comparative outputs can be set to prevent chatter-
ing in the output when the measurement value fluctuates finely near
the OUT value.
Auto-zero Time
This function sets the time for the display to return to zero when input
pulses stop. Set the time longer than the expected input pulse cycle
(the interval between one input pulse and the next). Proper measure-
ment is not possible if the time is set shorter than the input pulse
cycle.
Setting range: 0.0 to 19.9 s
Startup Compensation Time
The startup compensation time is the time to wait for the
measurement operation to be entered after the power supply of the
K3MA-F is turned ON. Use this parameter to cancel measurement
and comparative output operation until the a rotating body reaches
its normal speed when the power supply to the K3MA-F and rotating
body are turned ON at the same time.
Lower limit
setting
(OUT2)
Power supply
OUT2
output
Upper limit (high acting)
Measurement value
00000 displayed
Display
Output
Startup
compensation
time
Set value
OFF
ON
Hysteresis
Time
Changing the Display Color
The color of the value displayed can be set to either red or green. For
comparative output models, the display color can be set to change
from green to red, or from red to green, according to the status of the
comparison criterion.
Display Auto-return Time
This function automatically returns the display to the operation level’s
current value if no keys are pressed for a preset time (called the dis-
play auto-return time).
Move-to-Protect-Level Time
The time required to shift to the protect level can be set as desired.
MAX/MIN Display
The maximum and minimum measurement (display) values from the
time the power is turned ON until the current time can be stored and
displayed. This is useful, for example, when measuring the maximum
value.
OUT1 value
OUT2 value
MAX/MIN
MAX/MIN
MAX/MIN
Max
Min
8.781
LEVEL
LEVEL
LEVEL
Red
MODE
MODE
MODE
SHIFT
SHIFT
SHIFT
100.05
UP
UP
UP
Green
Current value
MAX value
MIN value
Red
MAX/MIN
MAX/MIN
MAX/MIN
113.36
K3MA-F
7