215083-6 TE Connectivity, 215083-6 Datasheet - Page 4

• Manufacturer Part Number: 215083-6
• Description: Conn IDC Connector M 6 POS 2.54mm IDT RA Cable Mount T/R
• Manufacturer: TE Connectivity
• Type: IDC Connectorr
• Series: Micro-MaTchr

Specifications of 215083-6

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 6
• Gender: M
• Contact Plating: Tin Over Nickel
• Termination Method: IDT
• Connector Type: Wire-to-Board
• Contact Material: Phosphor Bronze
• Lead Spacing: 1.27mm
• No. Of Rows: 2
• No. Of Ways: 6
• Rohs Compliant: Yes
• Product Type: Connector
• Type Of Connector: Male-On-Wire
• Wire/cable Type: Ribbon Cable
• Insulation Diameter (mm [in]): 0.90 [.035]
• Polarization: Without
• Number Of Positions: 6
• Wire Range (mm [awg]): 0.08-0.09² [28]
• Centerline (mm [in]): 1.27 [0.050]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Color: Red
• Housing Material: Polyester GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable
• Packaging Method: Reel
• Packaging Quantity: 2,500

.
Note: The Micro-MaTch male-on-wire connector is specifically designed to be disengaged from its
counterpart by pulling the cable in the appropriate direction.
3.5
3.5.1
The AMP Micro-MaTch connectors with IDC (insulation displacement connector) are designed for the
application of ribbon cable with the following dimensions and properties:
3.5.2
The Micro-MaTch COSI connector is designed for untwisted discrete wires in the range from 20-28 AWG.
3.6
Ratings:
−
−
−
−
−
Rev. F
R6-77 (Rev. 07-01)
- cable style
-conductor spacing
- conductor diameter :solid 0,30 mm
- insulation type
- insulation diamter
- Maximum insulation diameter for wires between 20-24 AWG is ∅ 0.76 mm
- Maximum insulation diamter for wires between 24-28 AWG is ∅ 1.27 mm
Temperature:
Current rating:
Voltage rating:
Test conditions:
Ribbon cable specification
COSI- cable specification
Ribbon cable and wire Specification
Performance and Test description
:AWG 28, UL style 2651
:1,27 nn (0,50”)
: semi rigid PVC
: 0,9 mm ± 0,1 mm
stranded 7*0,12-0,13 mm
-40°C to 105°C.
Followed test procedure: IEC 512-3
For current carrying capacity see derating curves
100 Volts DC or alternating current peak.
Unless specifically stated, tests and examinations required by this
specification shall be executed under any combination of conditions
as specified in IEC 68-1, clause 5.3
continuous operation throughout an ambient temperature range of
108-19052
Page 4 of 15