80610072557 3M Interconnect Solutions, 80610072557 Datasheet - Page 2

• Manufacturer Part Number: 80610072557
• Manufacturer: 3M Interconnect Solutions

Specifications of 80610072557

• Lead Free Status / RoHS Status: Supplier Unconfirmed

3M TelComm Products Division
PO Box 2963
Austin, TX 78769-2963
1.0 General
2.0 Application
2.01 Pull wire across top of "U" contact and cut off
2.03 Align 4051 Wire Insertion/Cut Off Tool with "U"
Important Notice
All statements, technical information and recommendations related to the Seller's products are based on information believed to
be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine
the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use.
Any statements or recommendations of the Seller which are not contained in the Seller's current publications shall have no force
or effect unless contained in an agreement signed by an authorized officer of the Seller. The statements contained herein are
made in lieu of all warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness
for a particular purpose which warranties are hereby expressly disclaimed.
SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT
NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL
DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER'S PRODUCTS THAT WERE
DEFECTIVE.
34-7010-7234-9
The 4051 Wire Insertion/Cut Off Tool is used to
insert wires into the "U" contact and to cut off
excess wire in Super Mini Modules when
conductor rearrangements are made inside the
module.
blade.
contact and wire. The slot is aligned with the "U"
contact and the groove with the wire.
781178
781186
1978 3M
2.03 Push straight down forcing the conductor into the
2.04 To cut off wire, align slot with cut off blade and
"U" contact. DO NOT ROCK TOOL BACK AND
FORTH.
groove with wire. Push straight down. Remove
excess wire from module. Do not rock tool back
and forth.
Litho in U.S.A.
781186
781186