BOXD945GCZL Intel (CPU), BOXD945GCZL Datasheet - Page 69

• Manufacturer Part Number: BOXD945GCZL
• Manufacturer: Intel (CPU)

Specifications of BOXD945GCZL

• Lead Free Status / RoHS Status: Supplier Unconfirmed

2.11.3 Fan Connector Current Capability
2.11.4 Power Supply Considerations
CAUTION
The processor fan must be connected to the processor fan connector, not to a chassis fan
connector. Connecting the processor fan to a chassis fan connector may result in onboard
component damage that will halt fan operation.
Table 32 lists the current capability of the fan connectors.
Table 32.
CAUTION
The +5 V standby line for the power supply must be capable of providing adequate +5 V standby
current. Failure to do so can damage the power supply. The total amount of standby current
required depends on the wake devices supported and manufacturing options.
System integrators should refer to the power usage values listed in Table 31 when selecting a power
supply for use with the board.
Additional power required will depend on configurations chosen by the integrator.
The power supply must comply with the following recommendations found in the indicated
sections of the ATX form factor specification.
•
•
•
•
Fan Connector
Processor fan
Front chassis fan
Rear chassis fan
The potential relation between 3.3 VDC and +5 VDC power rails (Section 4.2)
The current capability of the +5 VSB line (Section 4.2.1.2)
All timing parameters (Section 4.2.1.3)
All voltage tolerances (Section 4.2.2)
Fan Connector Current Capability
Maximum Available Current
3.0 A
1.5 A
1.5 A
Technical Reference
69