5962-8607101CA QP SEMICONDUCTOR, 5962-8607101CA Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/5/550/qp_semiconductor_sml.jpg)
5962-8607101CA
Manufacturer Part Number
5962-8607101CA
Description
Manufacturer
QP SEMICONDUCTOR
Datasheet
1.5962-8607101CA.pdf
(10 pages)
Specifications of 5962-8607101CA
Technology
Bipolar
Number Of Elements
1
Number Of Bits
8
Logic Family
F
Logical Function
Shift Register
Operating Supply Voltage (typ)
5V
Propagation Delay Time
17ns
Operating Temp Range
-55C to 125C
Operating Supply Voltage (min)
4.5V
Operating Supply Voltage (max)
5.5V
Operating Temperature Classification
Military
Mounting
Through Hole
Pin Count
14
Lead Free Status / RoHS Status
Not Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
DSCC FORM 2234
APR 97
1.2 herein. In addition, the manufacturer's PIN may also be marked. For packages where marking of the entire SMD PIN number
is not feasible due to space limitations, the manufacturer has the option of not marking the "5962-" on the device.
MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in accordance
with MIL-PRF-38535 to identify when the QML flow option is used.
approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to listing
as an approved source of supply shall affirm that the manufacturer's product meets the requirements of MIL-PRF-38535, appendix
A and the requirements herein.
each lot of microcircuits delivered to this drawing.
facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the
reviewer.
appendix A.
prior to quality conformance inspection. The following additional criteria shall apply:
3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed in
3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance to
3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an
3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided with
3.8 Notification of change. Notification of change to DSCC-VA shall be required for any change that affects this drawing.
3.9 Verification and review. DSCC, DSCC's agent, and the acquiring activity retain the option to review the manufacturer's
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535,
4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices
a.
b.
(1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
(2) T
DEFENSE SUPPLY CENTER COLUMBUS
Burn-in test, method 1015 of MIL-STD-883.
Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter tests
prior to burn-in are optional at the discretion of the manufacturer.
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the
inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1015 of
MIL-STD-883.
A
MICROCIRCUIT DRAWING
= +125 C, minimum.
COLUMBUS, OHIO 43218-3990
STANDARD
SIZE
A
REVISION LEVEL
D
SHEET
5962-86071
4