E2EZ-X8D1-N Omron, E2EZ-X8D1-N Datasheet - Page 7

• Manufacturer Part Number: E2EZ-X8D1-N
• Description: Proximity Sensors M30 8mm 2w DC N O 2m CBL
• Manufacturer: Omron
• Type: Inductive Proximity Sensorr
• Series: E2EZr

Specifications of E2EZ-X8D1-N

• Proximity Sensor Type: Inductive
• Proximity Sensor Sensing Distance: 8mm
• Proximity Sensor Sensing Distance Range: 7 to 15mm
• Proximity Sensor Switching Mode: NO
• Mounting: Panel
• Operating Temp Range: 0C to 55C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 10V
• Operating Supply Voltage (typ): 12/15/18/24V
• Operating Supply Voltage (max): 30V
• Pin Count: 2
• Maximum Operating Temperature: + 55 C
• Supply Voltage: 10 V to 30 V
• Mounting Style: Panel
• Sensing Distance: 8 mm
• Minimum Operating Temperature: 0 C
• Features: NO
• Sensor Type: Inductive
• Sensing Object: Metallic
• Response Frequency: 30Hz
• Material - Body: Nickel-Plated Brass
• Shielding: Shielded
• Voltage - Supply: 10 V ~ 30 V
• Output Type: NPN-NO
• Terminal Type: 2-Wire
• Package / Case: Cylinder, Threaded - M30
• Lead Free Status / RoHS Status: Compliant

Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use this product under ambient conditions that exceed the
ratings.
● Design
Influence of Surrounding Metal
When mounting the Sensor within a metal panel, ensure that the
clearances given in the following table are maintained. Failure to
maintain these distances may cause deterioration in the performance
of the Sensor.
Influence of Surrounding Metal (Unit: mm)
Mutual Interference
When installing Sensors face-to-face or side-by-side, ensure that the
minimum distances given in the following table are maintained.
Mutual Interference (Unit: mm)
Model
E2EZ-X2@
E2EZ-X4@
E2EZ-X8@
Model
E2EZ-X2@
E2EZ-X4@
E2EZ-X8@
l
Precautions for Correct Use
Item
Aluminum
Aluminum
Aluminum
Embedded
Iron
Iron
Iron
material
30
40
60
A
Item
WARNING
D
100
20
50
B
d dia.
10
0
2
0
5
0
l
12
25
18
40
30
70
d
10
D
0
2
0
5
0
B
A
16
32
m
8
m
n
18
36
27
54
45
90
n
Aluminum and Iron Cuttings
Normally aluminum or iron cuttings will not be detected even if they
adhere to or accumulate on the sensing surface.
Detection signals may be output for the following:
If this occurs, remove the cuttings from the sensing surface.
1. Relationship between the Size of the Cutting (d) and the Size of
Cuttings of the size d ≥
● Mounting
Do not tighten the nut with excessive force.
A washer must be used with the nut.
Note: 1. The allowable tightening strength depends on the distance from the
Cuttings of the size
* E2EZ-X2@: d ≥
2. Cuttings Pressed against the Sensing
Model
E2EZ-X2D@-@
E2EZ-X4D@-@
E2EZ-X8D@-@
E2EZ-X4C1
E2EZ-X4Y1
E2EZ-X8C1
E2EZ-X8Y1
Model
E2EZ-X2@
E2EZ-X4@
E2EZ-X8@
the Sensing Surface (D)
Surface
2. The following torque assume washers are being used.
edge of the head, as shown in the following table. (A is the distance
from the edge of the head. B includes the nut on the head side. If the
edge of the nut is in part A, the tightening torque for part A applies
instead.)
Tightening
Torque
Size
1
3
D on the sensing surface.
d*
Dimension
2
3
(Unit: mm)
(mm)
D on the sensing surface *
10
20
22
16
28
D
*
Part A
Torque
15 N·m
29 N·m
180 N·m
30 N·m
70 N·m
Part B Part A
sensing surface.
Pressed against
d
D
Torque
Cutting
29 N·m
39 N·m
Part B
E2EZ
Cutting
Sensing
surface
7