A3212ELH Allegro Microsystems Inc, A3212ELH Datasheet - Page 12

• Manufacturer Part Number: A3212ELH
• Manufacturer: Allegro Microsystems Inc

Specifications of A3212ELH

• Magnetic Type: Latch
• Operating Supply Voltage (min): 2.5V
• Operating Supply Voltage (typ): 2.75V
• Operating Supply Voltage (max): 3.5V
• Output Current: 1mA
• Mag Sensor Operate Point (g): 55Gs
• Mag Sensor Release Point (g): 10Gs
• Mag Sensor Hysteresis(g): 5.9Gs
• Package Type: SOT-23W
• Pin Count: 3
• Mounting: Surface Mount
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Not Compliant

A3211
A3212
5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719; 5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents pending.
mit improvements in the per for mance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
nor for any in fringe ment of patents or other rights of third parties which may result from its use.
Copyright ©2002-2009, Allegro MicroSystems, Inc.
The products described herein are manufactured under one or more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283; 5,389,889;
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such de par tures from the detail spec i fi ca tions as may be required to per-
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
The in for ma tion in clud ed herein is believed to be ac cu rate and reliable. How ev er, Allegro MicroSystems, Inc. assumes no re spon si bil i ty for its use;
and
15.75 ±0.51
3.02
+0.08
–0.05
2.16
MAX
0.43
0.51
REF
+0.05
–0.07
45°
1
4.09
2
+0.08
–0.05
For the latest version of this document, visit our website:
3
1.98
E
1.27 NOM
Package UA, 3-Pin SIP
A
E
1.32
B
E
Branded
Face
0.79 REF
www.allegromicro.com
C
0.41
45°
1.52 ±0.05
+0.03
–0.06
Mold Ejector
Pin Indent
Micropower, Ultrasensitive
For Reference Only; not for tooling use (reference DWG-9049)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
D
E
A
B
C
Gate burr area
Active Area Depth, 0.50 mm REF
Branding scale and appearance at supplier discretion
Hall element, not to scale
Dambar removal protrusion (6X)
D
N = Last two digits of device part number
T = Temperature code
Standard Branding Reference View
= Supplier emblem
1
Hall-Effect Switches
NNT
115 Northeast Cutoff
1.508.853.5000; www.allegromicro.com
Allegro MicroSystems, Inc.
Worcester, Massachusetts 01615-0036 U.S.A.
12