5962-90555023A E2V, 5962-90555023A Datasheet - Page 4

• Manufacturer Part Number: 5962-90555023A
• Manufacturer: E2V

Specifications of 5962-90555023A

• Lead Free Status / RoHS Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
specified in MIL-PRF-38535, appendix A and herein.
drawing shall be as specified on figure 2. When required in groups A, B, C, or D (see 4.3), the devices shall be
programmed by the manufacturer prior to test. A minimum of 50 percent of the total number of cells shall be programmed
or at least 25 percent of the total number of cells to any altered item drawing.
drawing.
are as specified in table I and shall apply over the full case operating temperature range.
electrical tests for each subgroup are described in table I.
listed in 1.2 herein. In addition, the manufacturer's PIN may also be marked. For packages where marking of the entire
SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the "5962-" on the
device.
compliance to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML"
certification mark in accordance with MIL-PRF-38535 to identify when the QML flow option is used.
an approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA
prior to listing as an approved source of supply shall affirm that the manufacturer's product meets the requirements of MIL-
PRF-38535, appendix A and the requirements herein.
provided with each lot of microcircuits delivered to this drawing.
manufacturer's facility and applicable required documentation. Offshore documentation shall be made available onshore at
the option of the reviewer.
result in a wide variety of configurations; two processing options are provided for selection in the contract, using an altered
item drawing.
3.2.3.1 and table II. It is recommended that users perform subgroups 7 and 9 after programming to verify the specific
program configuration.
provisions herein, including the requirements of the altered item drawing, shall be satisfied by the manufacturer prior to
delivery.
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as
3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.
3.2.3 Truth table. The truth table shall be as specified on figure 2.
3.2.3.1 Unprogrammed devices. The truth table for unprogrammed devices for contracts involving no altered item
3.2.3.2 Programmed devices. The truth table for programmed devices shall be as specified by an attached altered item
3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The
3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN
3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in
3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as
3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be
3.8 Notification of change. Notification of change to DSCC-VA shall be required for any change that affects this drawing.
3.9 Verification and review. DSCC, DSCC's agent, and the acquiring activity retain the option to review the
3.10 Processing options. Since the device is capable of being programmed by either the manufacturer or the user to
3.10.1 Unprogrammed device delivered to the user. All testing shall be verified through group A testing as defined in
3.10.2 Manufacturer-programmed device delivered to the user. All testing requirements and quality assurance
DEFENSE SUPPLY CENTER COLUMBUS
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
STANDARD
SIZE
A
REVISION LEVEL
B
SHEET
5962-90555
4