GP1FAV51RK0F Sharp Electronics, GP1FAV51RK0F Datasheet - Page 7
![no-image](/images/manufacturer_photos/0/6/602/sharp_electronics_sml.jpg)
GP1FAV51RK0F
Manufacturer Part Number
GP1FAV51RK0F
Description
Manufacturer
Sharp Electronics
Datasheet
1.GP1FAV51RK0F.pdf
(9 pages)
Specifications of GP1FAV51RK0F
Optical Fiber Type
RX
Data Transfer Rate
13.2Mbps
Optical Rise Time
23ns
Optical Fall Time
15ns
Jitter
1ns
Operating Temperature Classification
Commercial
Peak Wavelength
700nm
Operating Supply Voltage (min)
4.75V
Operating Supply Voltage (typ)
5V
Operating Supply Voltage (max)
5.25V
Operating Temp Range
-20C to 70C
Mounting
Snap in
Pin Count
3
Lead Free Status / RoHS Status
Compliant
■
(1) Stabilization of power supply line
(2) Soldering condition
(3) About getting dirt and dust in the connector coupling portion
(4) Cleaning
(5) Ground during assembling
(6) Assembly of the device
(7) Input signal
(8) Fixing pin
(9) Damage to connector coupling portion
(10) About getting the flux into connector coupling portion
Design and Production Notes
Please put a by-pass capacitor (0.1 μF) close to the device at least within 7 mm of the terminal.
Please also put a 4.7 μF capacitor across the power supply line nearby.
Solder at the condition within the absolute maximum ratings in this sheet. In case of using flow soldering, please make
sure of the conditions of process at the flow equipment. Also, do not use reflow soldering. In case of soldering by hand,
do not contact top of soldering iron to lead terminal directly. (Solder at a position more than 1.6 mm away from the base
of the lead terminal.)
In case dirt or dust comes into the connector coupling portion, please use a blower to take it off.
Any rigid rod-like object must not be inserted since into the coupling portion.
The internal device might be damaged, resulting deteriorated characteristics.
Do not immerse for cleaning. The solvent would get into the connector coupling portion resulting deteriorated
characteristics. Should it be necessary to remove the flux, please use one of the following solvents only to be applied with
a brush.
The human body and the soldering iron must be grounded against the static breakdown of the device during assembling.
Please avoid touching the device terminals as much as possible before assembling.
Please fix this device with a screw. In case that this device is not fixed with a screw, stress by detaching connector of
internal elements and leads can adversely affect the device’s reliability. Excessive torque can deform the package and
damage the optics. It can also adversely affect the device’s reliability because the device is used under continuous stress.
Please confirm the limit of fixing torque to the installation before fixing actually.
Recommended values
Note : Please contact and consult with a Sharp sales representative for any questions about above.
This product is designed intentionally based upon the signal transmission which is defined by the digital audio interface
standard ; CP1201. When a signal out of JEITA standard CP-1201 is inputted to this device, there might be a case that this
device can not receive a signal correctly from transmitting unit.
Since there are other products which has a different fixing pin shape, please make sure to confirm reference mounting
drawing for this device.
Please do not stress the connector coupling portion excessively since there might be a case that the shutter can’t operate
normally.
Please avoid getting a flux into connector coupling portion of this device, because there might be a case that the characteristics
deteriorate the shutter can’t operate normally.
Solvent : Isopropyl alcohol, Methyl alcohol
Screw : M3.0 × 8 mm tapping screw
Fixing torque : 0.7 to 0.8 N·m
Force applied by driver etc. : 39 N or less
7
GP1FAV51RK0F
Sheet No.: E2-A01301EN