SLFDM44H-064JI STEC, SLFDM44H-064JI Datasheet - Page 23

no-image

SLFDM44H-064JI

Manufacturer Part Number
SLFDM44H-064JI
Description
Manufacturer
STEC
Type
Flash Diskr
Datasheet

Specifications of SLFDM44H-064JI

Density
64MByte
Operating Supply Voltage (typ)
3.3/5V
Operating Temperature (min)
-40C
Operating Temperature (max)
85C
Package Type
Not Required
Mounting
Surface Mount
Pin Count
44
Operating Temperature Classification
Industrial
Operating Supply Voltage (min)
3.18/4.75V
Operating Supply Voltage (max)
3.465/5.25V
Programmable
Yes
Lead Free Status / RoHS Status
Not Compliant
REVISION HISTORY
Rev.
-301 5/26/04. Initial Release.
-302 5/27/04. Missing dimensioning added to 40-pin
-303 7/2/04. Pin Description changes: -IOIS16 not used in
-304 7/9/04. Endurance increased from 300,000 cycles min
-305 7/22/04. “up to” added to sustained read and write
-306 7/27/04 SLFDM44LPH-064J(I) dimensions corrected
-307 7/30/04. P/N SLFDM44LPH-064J(I) corrected to
SimpleTech Inc. reserves the right to make changes to specifications and product descriptions such as but not limited to numbers, parameters
and other technical information contained herein without notice. Contact SimpleTech Inc. sales office to obtain the latest specifications.
SimpleTech Inc. grants no warranty with respect to this Data Sheet, neither explicit nor implied, and it is not liable for direct or indirect
damages. Some States do not grant the exclusion of incidental damages and as such this statement may not be valid in such states. The
provisions of this Data Sheet do not convey to the purchaser of the device any license under any patent rights or other intellectual property
rights of SimpleTech Inc. or others.
SimpleTech P/N:
(where p=connector; q=LP if low profile; r=plug-in and housing;
U=RoHS compliant lead-free; I=Ind. Op. Temp)
Change Description from Previous Revision
horizontal plug-in Package Dimensions.
IDE mode; -IORDY description corrected to not used
by module and pulled up by 4.7K ohm resistor.
Performance rates for read and write described as
sustained read and sustained write. Error register bit 0
Function “not supported” phrase removed. DMA
commands removed (paper only error indicated that
DMA was supported). Identify Drive Information table
updated to reflect DMA not supported. DC
Characterists Sleep Mode value changed from 120uA
to 1200uA for 5V power supply.
to 2 million cycles min.
data rate performance.
to released product. Ordering Information made easy
to read.
SLFDM44H-064J(I).
SLFDMpqr-064J(U)(I)
Document Part Number 61000-02832-314 July 2005
-308 8/23/04. WP Jumpers labeled “Optional.” Tolerance
-309 10/21/04. Master/Slave jumpers corrected in
-310 10/29/04. Standard ECC, Endurance, and Warranty
-311 1/31/05. Write speed updated to “up to 1.5MB/s” from
-312 2/16/05. Shock parameter of 11ms corrected to 0.330
-313 4/22/05. This rev of the spec has MWDMA support.
-314 7/20/05. Separate shock and vibration for U option
of connector protrusion in SLFLD40LPV-xxxJ(I)
dimensions changed from 0.005 to 0.050.
Environmental Characteristics updated to testing
parameters. Definition for Serial #, Firmware Rev., and
Model # in the Identify Drive Information table added
in callout. Words 0, 4-5, 20-21, 49, and 63 in Drive ID
table corrected. SLFLD44V-xxxJ(I) flash disk module
added.
dimension illustration.
bullets added to Features on page 1.
3.4MB/s.
to 0.750ms. WP jumpering removed. 3/14/05 Humidity
parameter updated to 95% from 85%. CHS values
updated. 4/22/05. U and housing options added.
7/20/05. For higher revs of this spec, the MWDMA
support has been removed. Product with MWDMA
has been given a P/N of SLFDMpqr-064J2(U)(I).
added. 3.3V op voltage added to specification.
FLASH DISK MODULE
Page 23

Related parts for SLFDM44H-064JI