SLUFM2GU2UI-A STEC, SLUFM2GU2UI-A Datasheet - Page 9
![no-image](/images/no-image-200.jpg)
SLUFM2GU2UI-A
Manufacturer Part Number
SLUFM2GU2UI-A
Description
Manufacturer
STEC
Type
Flash Moduler
Datasheet
1.SLUFM2GU2UI-A.pdf
(22 pages)
Specifications of SLUFM2GU2UI-A
Density
2GByte
Operating Supply Voltage (typ)
5V
Operating Temperature (min)
-15C
Operating Temperature (max)
85C
Package Type
Not Required
Pin Count
9
Operating Temperature Classification
Commercial
Operating Supply Voltage (min)
4.75V
Operating Supply Voltage (max)
5.25V
Programmable
Yes
Lead Free Status / RoHS Status
Compliant
SLUFMxGU2U(I)-y
Datasheet
3.1.2 Controller external components
In addition to the functional blocks shown in Figure 4, the USB Flash Module has the following external
components:
3.2
Since the USB Flash Module provides a standard USB interface to the host, no software integration is
required, providing the shortest time-to-market for design engineers.
The firmware of the embedded USB 2.0 controller contains STEC’s advanced flash memory management
algorithms to ensure the most optimum device performance, reliability and endurance. It was designed to
maximize the benefits of flash memory, while at the same time overcoming inherent NAND flash
limitations. Implemented in firmware are the below features:
3.2.1 Bad Block Management
Inherent to NAND flash technology are areas (blocks) on the media that cannot be used for storage
because of their high error rate. These so-called ―bad blocks‖ are already identified by the flash vendor
during manufacturing, but can also be accumulated over time during device operation.
The USB 2.0 controller contains a table that lists all the bad blocks on the device (Bad Block Table), and
automatically maps out these blocks upon system initialization. During device operation it ensures that
newly accumulated bad blocks are also mapped out and added to the Bad Block Table.
Bad block management is 100% transparent to the host application, which will not be aware of the location
or existence of bad blocks on the media.
SLC NAND Flash for the most reliable data storage.
Crystal Oscillator 12Mhz, as the main clock source.
Flash file system management
Bad-block management
Wear-leveling
Performance optimization
Flash Management
61000-05386-113, December 2009
USB Flash Module
9