6B12HV Analog Devices Inc, 6B12HV Datasheet

no-image

6B12HV

Manufacturer Part Number
6B12HV
Description
Manufacturer
Analog Devices Inc
Datasheet

Specifications of 6B12HV

Lead Free Status / RoHS Status
Not Compliant
FEATURES
Single-channel isolated signal-conditioning modules.
Accepts outputs from, millivolt, volt and process current
signals.
Complete microcomputer-based data acquisition systems.
Can be remotely reconfigured for various sensor types and
input ranges.
APPLICATIONS
Process Monitoring & Control
Test Stand Automation
Machine Monitoring
Remote Energy Mangement
PRODUCT OVERVIEW
The 6B Series delivers sensor-to-host signal-conditioning for
remote applications. Software-configurable for a wide variety of
sensor types, including: analog input, analog output, and digital
I/O, the 6B Series is intended for remote data acquisition,
machine monitoring, remote energy management and process
monitoring and control applications.
Including transformer-based isolation, ranging, linearization,
A/d conversion and RS-232C/RS-485 serial communication for
up to 256 channels per serial port, the 6B Series modules and
boards are a complete, low-cost interface between computers
and analog signals.
All 6B Series input/output modules are fully encapsulated and
identical in pin-out and size, facilitating their ability to be mixed
and matched with all other 6B Series modules on the same
backplane. The 6B Series is fully rated over the industrial
temperature range of -25
Each 6B Series module and board is a complete
microcontroller-based process monitoring and control system,
with all calibration, address and linearizing parameters stored in
non-volatile memory. Being microcontroller-based, 6b Series
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
Material Testing
Laboratory Data Acquisition
o
C to +85
o
C.
Isolated, Field Configurable Analog Input
modules can be configured for various sensor types, including
RTD and thermocouple, and a wide variety of input ranges. This
reduces the number of different modules that need to be used
in a given application and carried in inventory.
Designed for industrial applications, the 6B Series modules
incorporate transformer-based isolation with surface-mount
manufacturing technology – providing increased reliability at
low cost. The compact, rugged 6B Series analog modules can be
mixed and matched on a 16-channel backplane for high density,
remote process monitoring and control.
Communications between backplanes, modules and host is in
ASCII over an RS-232C link or RS-485 bi-directional serial bus.
Circuitry to convert RS-232C to RS485 is built into the 6B
backplane. Baud rates are software programmable, with speeds
up to 19.2 K Baud.
The 6B Series digital subsystem communication is compatible
with the overall 6B Series communication protocol. Each digital
I/O board can be configured for its address, baud rate and
checksum status. Connection to the 16 and 24-channel solid
state relay backplanes is by a 50-conductor ribbon cable. This
enables interfacing with input and outputs from 4 V to 240 V.
Power control modules are also available that can switch up to
3A and come with a variety of ratings for low voltage DC up to
280 VAC.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
Figure 1. 6B12 & 6B12HV Functional Block Diagram
FUNCTIONAL BLOCK DIAGRAM
© 2004 Analog Devices, Inc. All rights reserved.
6B12 / 6B12HV
www.analog.com

Related parts for 6B12HV

6B12HV Summary of contents

Page 1

... FUNCTIONAL BLOCK DIAGRAM Figure 1. 6B12 & 6B12HV Functional Block Diagram Designed for industrial applications, the 6B Series modules incorporate transformer-based isolation with surface-mount manufacturing technology – providing increased reliability at low cost ...

Page 2

... The digitized value is passed serially across a magnetically isolated barrier (1500 V rms – Model 6B12, 2500 V rms – Model 6B12HV) and clocked custom controller chip. The on- board microprocessor then converts the data into engineering units as determined by the channel parameters. In between ...

Page 3

... Models 6B12 and 6B12HV Range Description (Software Configurable) ±150 mV ±500 mV ±1 V ±5 V ±10 V ± ±20 mA Ω 1 This range requires the use current-to-voltage conversion resistor, model AC1381. 2 Does not include the error of the current-to-voltage input resistor, Model AC1381. 6B12 and 6B12HV Specifications (typical @ +25° ...

Page 4

... When used with the CJC temperature sensor, model AC1361, provided on each channel of 6B Series backplanes. Specifications subject to change without notice. Normal Mode Rejection (NMR 240 V rms, continuous ANSI/IEEE C37.90.1-1989 Power Supply + ±5% +6 +100 mA 2.3" x 3.1" x 0.79" (58 78 19.1 mm) Environmental -25°C to +85°C -25°C to +85°C -40°C to +85° 95% @ +60°C non-condensing Rev Page 6B12 / 6B12HV ...

Page 5

... Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Description N N/C Figure 4 6B12 & 6B12HV Input Field Connections Rev Page 6B12 / 6B12HV ...

Page 6

... OUTLINE DIMENSIONS Figure 5. Outline Dimensions Rev Page 6B12 / 6B12HV ...

Page 7

... NOTES Rev Page 6B12 / 6B12HV ...

Page 8

... NOTES © 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective companies. D05164-0-9/04(0) Rev Page 6B12 / 6B12HV ...

Related keywords