B3W-9010-B2B Omron, B3W-9010-B2B Datasheet - Page 8

• Manufacturer Part Number: B3W-9010-B2B
• Description: Manual Switch
• Manufacturer: Omron
• Series: B3W-9r

Specifications of B3W-9010-B2B

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.05A @ 24VDC
• Actuator Type: Square Button
• Mounting Type: Through Hole
• Orientation: Vertical
• Outline: 12.00mm x 12.00mm
• Illumination: Illuminated
• Operating Force: 160gf
• Actuator: Square, Illuminated
• Contact Form: SPST - NO
• Body Size: 12 mm L x 11 mm H
• Color: Blue
• Operating Temperature Range: - 25 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: B3W9010B2B

B3W-9
Removing the Cap
Placing the Cap on the Switch
Hold the Cap at the side away from the mating section. Push
straight down until the mating section meets.
Removing the Cap
The Cap can be removed up to two times. Excessively removing
the Cap will cause the mating section to become weak, resulting
the operating section not mating completely or the Cap may fall
off.
Film Dimensions
Dimensions of the film are shown below. The thickness is 0.2 mm.
OMRON Corporation
Electronic Components Company
Switch Division
Manual Switch Department
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]/Fax: [phone]
Cat. No. A167-E1-04
1. Hold the cap at the side away from the mating section. Pull
2. Do not remove the cap while the Switch is mounted. Doing
straight up.
so will apply force to the soldered section and LEDs, result-
ing in malfunction.
Correct
Correct
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
7.4±0.1
In the interest of product improvement, specifications are subject to change without notice.
7.4±0.1
Incorrect
Incorrect
8.9±0.1
8.9±0.1
Storage Precautions
Storage Environment
To prevent degradation, such as discoloration, of the terminals
during storage, do not store the Switch in locations that are sub-
ject to the following conditions.
Storage condition
Store the Switches in the packaging box.
After the packaging box is opened, use the contents as quickly as
possible. When storing leftover parts, make sure that appropriate
measures are taken against humidity and corrosive gases.
Agreement of Product Use
Comply with the usage, storage, and disposal conditions speci-
fied by OMRON as outlined in the precautions in the product
datasheet and specifications.
1. High temperature or humidity
2. Corrosive gases
3. Direct sunlight
0509
B3W-9