STM8L162M8T6 STMicroelectronics, STM8L162M8T6 Datasheet - Page 9

• Manufacturer Part Number: STM8L162M8T6
• Description: 8 BITS MICROCONTR
• Manufacturer: STMicroelectronics
• Series: STM8L EnergyLiter

Specifications of STM8L162M8T6

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, IR, LCD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 28x12b, D/A 2x12
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STM8L162R8, STM8L162M8
2.1
STM8L Ultralow power 8-bit family benefits
High density STM8L162xx devices are part of the STM8L Ultralow power family providing
the following benefits:
●
●
●
●
STM8L Ultralow power microcontrollers can operate either from 1.8 to 3.6 V (down to 1.65 V
at power-down) or from 1.65 to 3.6 V. They are available in the 40 to +85 °C and 40 to
+125 °C temperature ranges.
These features make the STM8L Ultralow power microcontroller families suitable for a wide
range of applications:
●
●
●
●
●
The devices are offered in four different packages from 48 to 80 pins. Different sets of
peripherals are included depending on the device. Refer to
complete range of peripherals proposed in this family.
All STM8L Ultralow power products are based on the same architecture with the same
memory mapping and a coherent pinout.
Figure 1
Integrated system
–
–
–
–
–
Ultralow power consumption
–
–
–
Advanced features
–
–
Short development cycles
–
–
Medical and handheld equipment
Application control and user interface
PC peripherals, gaming, GPS and sport equipment
Alarm systems, wired and wireless sensors
Metering
shows the block diagram of the High density STM8L162xx families.
64 Kbytes of high-density embedded Flash program memory
2 Kbytes of data EEPROM
4 Kbytes of RAM
Internal high-speed and low-power low speed RC.
Embedded reset
1 µA in Active-halt mode
Clock gated system and optimized power management
Capability to execute from RAM for Low power wait mode and Low power run
mode
Up to 16 MIPS at 16 MHz CPU clock frequency
Direct memory access (DMA) for memory-to-memory or peripheral-to-memory
access.
Application scalability across a common family product architecture with
compatible pinout, memory map and modular peripherals.
Wide choice of development tools
Doc ID 17959 Rev 2
Section 3
for an overview of the
Description
9/121